Linux Networking & TCP/IP for Developers · Leçon

Sockets UDP client-serveur

Développez une communication sans connexion fondée sur des datagrammes avec des sockets UDP pour les applications privilégiant la rapidité à la fiabilité.

Sockets UDP client-serveur est une leçon Linux Networking & TCP/IP for Developers gratuite sur CoddyKit. Ceci est la leçon 3 sur 4. Tu peux lire la leçon complète ci-dessous gratuitement — puis la pratiquer en direct dans le navigateur avec un éditeur de code intégré et un tuteur IA 24/7. Elle fait partie du parcours d'apprentissage Linux Networking & TCP/IP for Developers, et ta progression se synchronise sur le web et l'application CoddyKit. Le cours Linux Networking & TCP/IP for Developers comprend 4 leçons au total.

Certaines parties de cette leçon n'ont pas encore été traduites et s'affichent en anglais.

What is UDP?

Welcome to UDP! While TCP focused on reliable, connection-oriented communication, UDP (User Datagram Protocol) offers a different approach: connectionless and unreliable.

Think of UDP like sending a postcard. You write the message and send it, but you don't know if it arrived, or in what order, or if it got lost. It's fast, but there's no guarantee.

UDP vs. TCP: Key Differences

Understanding when to use UDP means knowing its core differences from TCP:

Connectionless: No handshake needed before sending data.
Unreliable: No guaranteed delivery, ordering, or duplicate protection.
Faster: Less overhead due to no connection setup or reliability checks.
Datagrams: Data is sent in independent packets called datagrams.

UDP is perfect for applications where speed is more critical than guaranteed delivery.

When to Use UDP

UDP shines in scenarios where some data loss is acceptable, or where applications handle reliability themselves. Common uses include:

Online Gaming: Speed is crucial for real-time action.
Voice/Video Streaming: Small delays are better than retransmissions.
DNS (Domain Name System): Quick lookups are prioritized.
SNMP (Simple Network Management Protocol): Monitoring network devices.

These applications prioritize low latency over absolute data integrity.

The Python `socket` Module for UDP

Python's socket module is your toolkit for network programming, including UDP. To create a UDP socket, you specify the address family and socket type.

socket.AF_INET: For IPv4 addresses.
socket.SOCK_DGRAM: Specifies a UDP socket (datagram socket).

Let's see how to create one.

Creating a UDP Socket

Here's how to create a basic UDP socket. Notice it's very similar to TCP, but with SOCK_DGRAM.

Run this code to see a UDP socket being initialized and then closed.

import socket

def main():
    # AF_INET for IPv4, SOCK_DGRAM for UDP
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    print("UDP socket created successfully!")
    udp_socket.close()
    print("Socket closed.")

if __name__ == "__main__":
    main()

UDP Server: Binding to an Address

A UDP server needs to bind() to a specific IP address and port to listen for incoming datagrams. This tells the operating system where the server expects to receive data.

Unlike TCP, there's no listen() or accept() for UDP as it's connectionless. The server just waits to receive.

import socket

HOST = '127.0.0.1' # Localhost
PORT = 12345       # Port to listen on

def main():
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    udp_socket.bind((HOST, PORT))
    print(f"UDP server bound to {HOST}:{PORT}")
    udp_socket.close()

if __name__ == "__main__":
    main()

UDP Server: Receiving Data

The recvfrom() method is used by a UDP server to receive data. It returns both the data and the address of the sender.

The server below will wait for one message, print it, and then close. Try running it and then run the client code in the next scene!

import socket

HOST = '127.0.0.1'
PORT = 12345

def main():
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    udp_socket.bind((HOST, PORT))
    print(f"UDP server listening on {HOST}:{PORT}")

    print("Waiting for message...")
    data, addr = udp_socket.recvfrom(1024) # Buffer size 1024 bytes
    print(f"Received '{data.decode()}' from {addr}")
    udp_socket.close()

if __name__ == "__main__":
    main()

UDP Client: Sending Data

A UDP client uses the sendto() method to send data. It takes the data (as bytes) and the destination address (IP and port) as arguments.

The client doesn't need to bind to a specific port unless it expects to receive a reply on that port. An ephemeral port is assigned automatically.

Run this client after starting the server from the previous scene!

import socket

SERVER_HOST = '127.0.0.1'
SERVER_PORT = 12345

def main():
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    message = "Hello UDP Server!"
    udp_socket.sendto(message.encode(), (SERVER_HOST, SERVER_PORT))
    print(f"Sent '{message}' to {SERVER_HOST}:{SERVER_PORT}")
    udp_socket.close()

if __name__ == "__main__":
    main()

Full UDP Echo Server & Client

Let's create a simple UDP echo server that receives a message and sends it back to the client, and a client that sends a message and waits for the echo.

First, run the server. Then, run the client in a separate terminal or execution environment.

import socket

# --- UDP Echo Server ---
HOST = '127.0.0.1'
PORT = 12345

def run_server():
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    udp_socket.bind((HOST, PORT))
    print(f"Server listening on {HOST}:{PORT}")

    try:
        while True:
            data, addr = udp_socket.recvfrom(1024)
            print(f"Received '{data.decode()}' from {addr}")
            # Echo back to the client
            udp_socket.sendto(b"Echo: " + data, addr)
            print(f"Echoed back to {addr}")
    except KeyboardInterrupt:
        print("Server shutting down.")
    finally:
        udp_socket.close()

if __name__ == "__main__":
    run_server()

Full UDP Echo Client

Now, run this client code. It will send a message to the running server and then wait to receive the echoed response.

This demonstrates a complete, simple UDP communication loop.

import socket

# --- UDP Echo Client ---
SERVER_HOST = '127.0.0.1'
SERVER_PORT = 12345

def run_client():
    udp_socket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    message = "Hello from UDP Client!"
    
    udp_socket.sendto(message.encode(), (SERVER_HOST, SERVER_PORT))
    print(f"Sent '{message}' to {SERVER_HOST}:{SERVER_PORT}")

    print("Waiting for echo...")
    data, addr = udp_socket.recvfrom(1024)
    print(f"Received echo '{data.decode()}' from {addr}")
    udp_socket.close()

if __name__ == "__main__":
    run_client()

UDP Client-Server Check

Which of the following statements about UDP sockets is TRUE?

Recap: UDP Sockets

In this lesson, you've explored the world of UDP sockets, understanding their fundamental differences from TCP.

UDP is connectionless and unreliable, prioritizing speed.
It uses datagrams for communication.
Python's socket module with SOCK_DGRAM creates UDP sockets.
Servers use bind() and recvfrom().
Clients use sendto().

Now you can choose the right protocol for your application's needs!

Questions Fréquemment Posées

La leçon « Sockets UDP client-serveur » est-elle gratuite ?

Oui — le texte complet de « Sockets UDP client-serveur » est gratuit à lire ici sur le web. Pour la pratiquer de manière interactive (un éditeur de code intégré et un tuteur IA 24/7) et déverrouiller le reste du cours Linux Networking & TCP/IP for Developers, passe à CoddyKit PRO. Le cours Linux Networking & TCP/IP for Developers comprend 4 leçons au total.

Qu'est-ce que j'apprendrai dans « Sockets UDP client-serveur » ?

Développez une communication sans connexion fondée sur des datagrammes avec des sockets UDP pour les applications privilégiant la rapidité à la fiabilité. Tu pratiques Linux Networking & TCP/IP for Developers avec du code pratique que tu exécutes directement dans le navigateur, et un tuteur IA 24/7 répond à tes questions au fur et à mesure que tu avances dans la leçon.

Dois-je avoir de l'expérience pour commencer Linux Networking & TCP/IP for Developers ?

Aucune expérience préalable n'est requise. Linux Networking & TCP/IP for Developers sur CoddyKit est structuré pour les débutants jusqu'aux apprenants avancés, donc tu peux commencer ici ou depuis le début et avancer à ton rythme. Ceci est la leçon 3 sur 4.

Combien de temps prend la leçon « Sockets UDP client-serveur » ?

La plupart des leçons CoddyKit prennent environ 5–10 minutes. Chacune est courte et interactive, tu progresses régulièrement et tu repiques exactement où tu t'es arrêté sur le web et l'app.

Peux-tu écrire et exécuter du code dans cette leçon Linux Networking & TCP/IP for Developers ?

Oui. Chaque leçon Linux Networking & TCP/IP for Developers inclut un éditeur de code intégré, tu écris et exécutes du vrai code directement dans ton navigateur et tu reçois des retours IA instantanés — aucune configuration locale requise.

Toutes les leçons de ce cours

← Retour à Linux Networking & TCP/IP for Developers