실시간 진행 링 만들기
캔버스와 상태를 결합해 위젯을 만듭니다.
실시간 진행 링 만들기은(는) CoddyKit의 무료 Jetpack Compose Academy 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Jetpack Compose Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Jetpack Compose Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
The Goal
Time to build something real: a progress ring that fills as a value grows. It blends canvas drawing with live Compose state.
An Arc, Not a Circle
A ring is really an arc. We draw a faint full circle as a track, then a bright arc on top showing the progress so far.
Hold the Progress
Store the value in state so the ring redraws when it changes. A float from 0f to 1f maps cleanly to zero through full.
var progress by remember { mutableStateOf(0.25f) }Draw the Track
First paint the background ring with drawCircle using a Stroke. A soft gray track shows the full path the progress will fill.
drawCircle(
color = Color.LightGray,
style = Stroke(width = 24f)
)Meet drawArc
The hero is drawArc. It draws a slice of a circle defined by a start angle and a sweep angle, both measured in degrees.
drawArc(
color = Color.Blue,
startAngle = -90f,
sweepAngle = 90f,
useCenter = false
)Start at the Top
Angle 0 points right, so we use a startAngle of -90f to begin at the top. That feels natural for a progress indicator.
Sweep by Progress
A full circle is 360 degrees, so the sweepAngle is just progress times 360. At 0.5f the arc covers exactly half the ring.
val sweep = progress * 360f
drawArc(color = Color.Blue, startAngle = -90f, sweepAngle = sweep, useCenter = false)useCenter Stays False
Keep useCenter false so you draw a ring slice, not a filled pie wedge. With a Stroke style it becomes a clean rounded band.
drawArc(color = Color.Blue, startAngle = -90f, sweepAngle = sweep, useCenter = false, style = Stroke(width = 24f, cap = StrokeCap.Round))Animate the Value
Wrap the value in animateFloatAsState so changes glide instead of jumping. The ring then smoothly grows toward each new target.
val animated by animateFloatAsState(targetValue = progress)Add a Gradient
Swap the flat color for a sweepGradient brush and the ring gets a vivid, modern look as the colors rotate around it.
drawArc(brush = Brush.sweepGradient(listOf(Color.Cyan, Color.Magenta)), startAngle = -90f, sweepAngle = sweep, useCenter = false, style = Stroke(24f))Layer the Label
Place a Text showing the percentage in a Box centered over the Canvas. Now your widget reads as a complete, polished control.
Quick Check
How do you turn a 0f-to-1f progress value into the arc's sweep?
Recap
You built a live ring: a track circle, a drawArc swept by progress times 360, animated state, and a gradient stroke. Beautiful work! 🌀
자주 묻는 질문
“실시간 진행 링 만들기” 강의는 무료인가요?
네 — “실시간 진행 링 만들기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Jetpack Compose Academy 강의 전체를 잠금 해제할 수 있습니다. Jetpack Compose Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“실시간 진행 링 만들기”에서 뭘 배우나요?
캔버스와 상태를 결합해 위젯을 만듭니다. 브라우저에서 직접 실행하는 실습 코드로 Jetpack Compose Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Jetpack Compose Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Jetpack Compose Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“실시간 진행 링 만들기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Jetpack Compose Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Jetpack Compose Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.