0Pricing
NestJS Enterprise Backend APIs · Lektion

Server-Sent Events für unidirektionales Push

Streamen Sie Live-Aktualisierungen mit dem @Sse-Dekorator und RxJS-Observables an Clients

Server-Sent Events für unidirektionales Push ist eine kostenlose NestJS Enterprise Backend APIs-Lektion auf CoddyKit. Dies ist Lektion 3 von 4. Du kannst die komplette Lektion unten kostenlos lesen – dann übst du sie direkt im Browser mit einem integrierten Code-Editor und einem KI-Tutor rund um die Uhr. Sie ist Teil des NestJS Enterprise Backend APIs-Lernpfads, und dein Fortschritt wird über Web und CoddyKit-App synchronisiert. Der NestJS Enterprise Backend APIs-Kurs umfasst insgesamt 4 Lektionen.

Teile dieser Lektion wurden noch nicht übersetzt und werden auf Englisch angezeigt.

Why Server-Sent Events?

Server-Sent Events (SSE) let a server push a continuous stream of updates to a client over a single, long-lived HTTP connection. It is the simplest way to deliver one-way, server-to-client live data such as notifications, progress bars, or dashboard metrics.

  • One-way only: the server talks, the client listens. There is no client-to-server channel on the same connection.
  • Plain HTTP: no special protocol upgrade like WebSockets need. It rides on a normal GET request.
  • Auto-reconnect: the browser's EventSource reconnects automatically if the connection drops.

In NestJS, SSE is a first-class feature exposed through the @Sse() decorator combined with RxJS observables.

SSE vs WebSockets

Both stream live data, but they solve different problems. Choosing the right one is an architectural decision.

  • SSE: server → client only, text-based, runs over HTTP/1.1 or HTTP/2, built-in reconnection and event IDs. Ideal for feeds, alerts, and progress.
  • WebSockets: full-duplex (both directions), binary or text, requires a protocol upgrade. Ideal for chat, multiplayer games, and collaborative editing.

If your clients only need to receive updates, SSE is lighter, easier to scale behind standard HTTP infrastructure, and requires no extra client library. Reach for WebSockets only when the client must also push messages in real time.

The wire format

SSE is just a streaming HTTP response with the content type text/event-stream. Each message is a block of text fields separated by newlines, and each block ends with a blank line.

  • data: the payload (often a JSON string).
  • event: a named event type the client can listen for.
  • id: a message identifier used for reconnection via Last-Event-ID.
  • retry: the reconnection delay in milliseconds.

You rarely format this by hand in NestJS — the framework serializes a typed object into these fields for you — but knowing the shape helps you debug with curl.

// Raw text/event-stream bytes the server emits
// (NestJS builds this for you from a MessageEvent)
const sample =
  'id: 42\n' +
  'event: heartbeat\n' +
  'data: {"status":"ok","ts":1718000000}\n' +
  '\n';

process.stdout.write(sample);

Your first @Sse endpoint

The @Sse() decorator marks a controller method as an SSE stream. Instead of returning a plain value, the method returns an RxJS Observable. Every value the observable emits becomes one SSE message sent to the client.

NestJS expects each emitted value to be a MessageEvent-shaped object with a data property. It automatically sets the text/event-stream headers and keeps the connection open.

import { Controller, Sse, MessageEvent } from '@nestjs/common';
import { interval, map, Observable } from 'rxjs';

@Controller('events')
export class EventsController {
  @Sse('clock')
  clock(): Observable<MessageEvent> {
    return interval(1000).pipe(
      map((n) => ({ data: { tick: n, time: new Date().toISOString() } })),
    );
  }
}

The MessageEvent shape

NestJS exports a MessageEvent interface that maps directly onto the SSE wire fields. Only data is required; the rest are optional.

  • data — string or object. Objects are JSON-stringified automatically.
  • type — becomes the event: field (a named event).
  • id — becomes the id: field, enabling resume-on-reconnect.
  • retry — becomes the retry: field in milliseconds.

Returning a well-typed object keeps your stream self-documenting and lets clients subscribe to specific named events.

import { MessageEvent } from '@nestjs/common';

function buildEvent(orderId: string, n: number): MessageEvent {
  return {
    id: String(n),
    type: 'order.updated',
    retry: 5000,
    data: { orderId, sequence: n },
  };
}

console.log(buildEvent('ord_123', 7));

Pushing domain events with a Subject

A fixed interval is fine for clocks, but real systems push when something happens. The idiomatic pattern is an RxJS Subject living in a service. Your business logic calls .next() on the subject whenever an event occurs, and the SSE endpoint simply exposes the subject as an observable.

This cleanly decouples the producer (any service) from the transport (the SSE controller).

import { Injectable, MessageEvent } from '@nestjs/common';
import { Subject, Observable } from 'rxjs';

@Injectable()
export class NotificationsService {
  private readonly stream$ = new Subject<MessageEvent>();

  emit(payload: unknown): void {
    this.stream$.next({ type: 'notification', data: payload });
  }

  asObservable(): Observable<MessageEvent> {
    return this.stream$.asObservable();
  }
}

Wiring the service to the controller

The controller injects the service and returns its observable from an @Sse() method. Any other part of the app — a queue consumer, a webhook handler, a cron job — can inject the same service and call emit() to broadcast to every connected client.

Because a plain Subject is multicast, all subscribers receive each emission. This is exactly what you want for a shared notification feed.

import { Controller, Post, Body, Sse, MessageEvent } from '@nestjs/common';
import { Observable } from 'rxjs';
import { NotificationsService } from './notifications.service';

@Controller('notifications')
export class NotificationsController {
  constructor(private readonly notifications: NotificationsService) {}

  @Sse('stream')
  stream(): Observable<MessageEvent> {
    return this.notifications.asObservable();
  }

  @Post()
  publish(@Body() body: { message: string }) {
    this.notifications.emit(body);
    return { accepted: true };
  }
}

Per-user filtered streams

A global subject broadcasts to everyone. In an enterprise API you usually want each client to receive only their events. Use RxJS operators like filter and map to tailor the stream per request, reading the user from a route param or the authenticated request.

The @Sse() method can accept normal route decorators such as @Param() and @Req(), so you can scope the observable to the current user.

import { Controller, Param, Sse, MessageEvent } from '@nestjs/common';
import { Observable, filter, map } from 'rxjs';
import { EventsBus } from './events.bus';

@Controller('users')
export class UserFeedController {
  constructor(private readonly bus: EventsBus) {}

  @Sse(':userId/feed')
  feed(@Param('userId') userId: string): Observable<MessageEvent> {
    return this.bus.events$.pipe(
      filter((e) => e.userId === userId),
      map((e) => ({ type: e.kind, data: e.payload })),
    );
  }
}

Heartbeats keep the connection alive

Proxies, load balancers, and browsers may close an idle connection. A heartbeat — a periodic comment or no-op event — keeps the pipe warm. With RxJS you merge your real event stream with a slow timer.

Send heartbeats as a distinct event type (or as SSE comment lines) so clients can ignore them. A common interval is every 15–30 seconds, comfortably under typical proxy idle timeouts.

import { merge, interval, map, Observable } from 'rxjs';
import { MessageEvent } from '@nestjs/common';

export function withHeartbeat(
  source$: Observable<MessageEvent>,
): Observable<MessageEvent> {
  const heartbeat$ = interval(15000).pipe(
    map((): MessageEvent => ({ type: 'heartbeat', data: 'ping' })),
  );
  return merge(source$, heartbeat$);
}

Cleanup, errors, and backpressure

When a client disconnects, NestJS unsubscribes from your observable. Make sure your stream releases resources on unsubscribe — use finalize() for cleanup and never leak timers or listeners.

  • Use catchError to convert errors into a final event instead of crashing the stream.
  • Use finalize to log or decrement a connection counter when the client leaves.
  • Beware backpressure: a fast producer with a slow client buffers in memory. Throttle or sample high-frequency sources.
import { Observable, catchError, finalize, of } from 'rxjs';
import { MessageEvent } from '@nestjs/common';

export function safeStream(
  source$: Observable<MessageEvent>,
  onClose: () => void,
): Observable<MessageEvent> {
  return source$.pipe(
    catchError((err) =>
      of<MessageEvent>({ type: 'error', data: { message: err.message } }),
    ),
    finalize(onClose),
  );
}

Consuming the stream from a client

Browsers consume SSE with the native EventSource API. It connects, dispatches messages, and reconnects automatically. Listen to the default message event for unnamed data, or add listeners for your named event types.

Note that EventSource only supports GET and cannot set custom headers, so auth is usually done via cookies or a token in the query string. Tools like curl -N are great for quick debugging from the terminal.

// Browser-side consumer
const es = new EventSource('/notifications/stream');

es.addEventListener('notification', (e) => {
  const payload = JSON.parse(e.data);
  console.log('new notification', payload);
});

es.addEventListener('heartbeat', () => {
  // keep-alive, ignore
});

es.onerror = () => console.warn('reconnecting...');

Quick Check

Test your understanding of when and how to use SSE in NestJS.

Recap

You learned how to stream one-way live updates from NestJS using Server-Sent Events:

  • SSE is server-to-client only over plain HTTP, with built-in browser auto-reconnect — choose it over WebSockets when clients only need to receive.
  • The @Sse() decorator turns a controller method into a stream that returns an Observable<MessageEvent>; each emission becomes one message.
  • A MessageEvent maps to the wire fields data, type, id, and retry; objects are JSON-serialized for you.
  • Push real domain events with a shared Subject in a service, and scope per-user streams with filter and map.
  • Keep connections healthy with heartbeats via merge, and clean up safely using catchError and finalize.
  • Consume on the client with the native EventSource API.

Häufig gestellte Fragen

Ist die Lektion „Server-Sent Events für unidirektionales Push“ kostenlos?

Ja — der vollständige Text von „Server-Sent Events für unidirektionales Push“ ist hier im Web kostenlos zu lesen. Um sie interaktiv zu üben (integrierter Code-Editor und 24/7 KI-Tutor) und den Rest des NestJS Enterprise Backend APIs-Kurses freizuschalten, upgrade auf CoddyKit PRO. Der NestJS Enterprise Backend APIs-Kurs umfasst insgesamt 4 Lektionen.

Was lerne ich in „Server-Sent Events für unidirektionales Push“?

Streamen Sie Live-Aktualisierungen mit dem @Sse-Dekorator und RxJS-Observables an Clients Du übst NestJS Enterprise Backend APIs mit praktischem Code, den du direkt im Browser ausführst, und ein 24/7 KI-Tutor beantwortet deine Fragen während du die Lektion bearbeitest.

Brauche ich Erfahrung, um NestJS Enterprise Backend APIs zu starten?

Keine Vorkenntnisse erforderlich. NestJS Enterprise Backend APIs auf CoddyKit ist für Anfänger bis fortgeschrittene Lernende strukturiert, sodass du hier starten oder von Anfang an beginnen und in deinem eigenen Tempo voranschreiten kannst. Dies ist Lektion 3 von 4.

Wie lange dauert die Lektion „Server-Sent Events für unidirektionales Push“?

Die meisten CoddyKit-Lektionen dauern etwa 5–10 Minuten. Jede ist kompakt und interaktiv, sodass du stetig Fortschritte machst und genau dort weitermachst, wo du aufgehört hast – im Web und in der App.

Kann ich in dieser NestJS Enterprise Backend APIs-Lektion Code schreiben und ausführen?

Ja. Jede NestJS Enterprise Backend APIs-Lektion enthält einen integrierten Code-Editor, sodass du echten Code direkt in deinem Browser schreibst und ausführst und sofort KI-Feedback erhältst — ohne lokale Einrichtung erforderlich.

Alle Lektionen in diesem Kurs

  1. WebSocket-Gateways mit dem Socket.IO-Adapter
  2. Socket-Verbindungen authentifizieren und absichern
  3. Server-Sent Events für unidirektionales Push
  4. Echtzeit mit einem Redis-Pub/Sub-Adapter skalieren
← Zurück zu NestJS Enterprise Backend APIs