Aşağı Akış Hataları için Devre Kesiciler
Opossum tarzı devre kesici entegrasyonuyla hizmetleri zincirleme hatalardan koruyun.
Aşağı Akış Hataları için Devre Kesiciler, CoddyKit'te ücretsiz bir NestJS Enterprise Backend APIs dersidir. Bu, 4 dersinin 2. dersidir. Aşağıdan dersin tamamını ücretsiz okuyabilir, sonra tarayıcıda yerleşik kod editörü ve 7/24 yapay zeka koçu ile uygulamalı olarak pratik yapabilirsin. Bu, NestJS Enterprise Backend APIs öğrenme yolunun bir parçasıdır ve ilerlemeniz web ve CoddyKit uygulaması arasında senkronize olur. NestJS Enterprise Backend APIs kursu toplamda 4 dersten oluşur.
Bu dersin bazı bölümleri henüz çevrilmemiş olup İngilizce olarak gösterilmektedir.
Why Cascading Failures Happen
In an enterprise NestJS backend, your service rarely lives alone. It calls a payment gateway, an auth provider, a search cluster, other microservices. When one downstream dependency slows down, every request waiting on it holds a connection, a thread, and a chunk of the event loop.
- A slow dependency exhausts your HTTP connection pool.
- Pending requests pile up; latency climbs everywhere.
- Your service becomes unhealthy and its own callers start failing.
This domino effect is a cascading failure. A circuit breaker is the pattern that stops the dominoes from falling.
The Circuit Breaker State Machine
A circuit breaker wraps a risky call and tracks its health through three states:
- CLOSED — calls flow through normally. Failures are counted.
- OPEN — too many failures occurred; calls are rejected instantly without touching the dependency. This gives the downstream time to recover.
- HALF_OPEN — after a cooldown, a few trial calls are allowed. If they succeed, the breaker closes; if they fail, it opens again.
The key insight: when the breaker is OPEN, you fail fast instead of waiting on a timeout for every request.
A Minimal Breaker From Scratch
Before reaching for a library, it helps to understand the mechanics. Here is a tiny, self-contained breaker in TypeScript that flips between CLOSED and OPEN based on consecutive failures and a reset timeout.
This runs standalone so you can watch the state transitions.
type State = 'CLOSED' | 'OPEN' | 'HALF_OPEN';
class MiniBreaker {
private state: State = 'CLOSED';
private failures = 0;
private openedAt = 0;
constructor(private threshold = 3, private resetMs = 1000) {}
async call<T>(fn: () => Promise<T>): Promise<T> {
if (this.state === 'OPEN') {
if (Date.now() - this.openedAt >= this.resetMs) this.state = 'HALF_OPEN';
else throw new Error('Circuit OPEN: failing fast');
}
try {
const result = await fn();
this.failures = 0;
this.state = 'CLOSED';
return result;
} catch (e) {
this.failures++;
if (this.failures >= this.threshold) {
this.state = 'OPEN';
this.openedAt = Date.now();
}
throw e;
}
}
get current() { return this.state; }
}
async function main() {
const breaker = new MiniBreaker(2, 500);
const flaky = () => Promise.reject(new Error('downstream down'));
for (let i = 0; i < 4; i++) {
try { await breaker.call(flaky); }
catch (e) { console.log(`call ${i}: ${(e as Error).message} [state=${breaker.current}]`); }
}
}
main();Enter opossum
Hand-rolled breakers miss the hard parts: rolling-window statistics, percentage-based thresholds, half-open trial limits, and metrics. opossum is the de-facto Node.js circuit breaker and integrates cleanly into NestJS providers.
timeout— how long before a call is considered failed.errorThresholdPercentage— % of failures in the window that trips the breaker.resetTimeout— how long OPEN lasts before a HALF_OPEN trial.rollingCountTimeout— the size of the statistical window.
Install it with npm i opossum and npm i -D @types/opossum.
import CircuitBreaker from 'opossum';
const options: CircuitBreaker.Options = {
timeout: 3000, // a call slower than 3s counts as a failure
errorThresholdPercentage: 50, // trip when >=50% of calls fail
resetTimeout: 10000, // stay OPEN for 10s, then try HALF_OPEN
rollingCountTimeout: 10000, // 10s statistical window
rollingCountBuckets: 10, // split the window into 10 buckets
};
// The action is the function we want to protect
async function fetchUser(id: string): Promise<{ id: string }> {
// ... real HTTP call to a downstream user service ...
return { id };
}
export const userBreaker = new CircuitBreaker(fetchUser, options);Wrapping a Downstream Call in a NestJS Provider
In NestJS, the breaker belongs in a provider that owns one logical dependency. Build the CircuitBreaker once in the constructor (or a factory) so the rolling statistics persist across requests — never create a new breaker per request, or it can never learn the dependency's health.
Expose a method that delegates to breaker.fire(...).
import { Injectable } from '@nestjs/common';
import { HttpService } from '@nestjs/axios';
import { firstValueFrom } from 'rxjs';
import CircuitBreaker from 'opossum';
interface PricingDto { sku: string; cents: number; }
@Injectable()
export class PricingClient {
private readonly breaker: CircuitBreaker<[string], PricingDto>;
constructor(private readonly http: HttpService) {
this.breaker = new CircuitBreaker(
(sku: string) => this.requestPrice(sku),
{ timeout: 2000, errorThresholdPercentage: 50, resetTimeout: 15000 },
);
}
private async requestPrice(sku: string): Promise<PricingDto> {
const res = await firstValueFrom(
this.http.get<PricingDto>(`https://pricing.internal/skus/${sku}`),
);
return res.data;
}
getPrice(sku: string): Promise<PricingDto> {
return this.breaker.fire(sku);
}
}Fallbacks: Degrade Gracefully
Failing fast is good, but returning a hard error to the user is often worse than returning something reasonable. opossum's fallback() runs whenever the action rejects or the breaker is OPEN.
- Serve a cached or last-known-good value.
- Return a safe default (for example, an empty recommendations list).
- Queue the work for later instead of dropping it.
The fallback receives the same arguments plus the triggering error, so you can branch on it.
import CircuitBreaker from 'opossum';
type Recommendation = { id: string };
function buildRecommendationBreaker(
action: (userId: string) => Promise<Recommendation[]>,
) {
const breaker = new CircuitBreaker(action, {
timeout: 1500,
errorThresholdPercentage: 40,
resetTimeout: 20000,
});
// When OPEN or the action fails, return a safe empty list
breaker.fallback((_userId: string, err?: Error) => {
if (err) console.warn('recommendations degraded:', err.message);
return [] as Recommendation[];
});
return breaker;
}Listening to Breaker Events
A breaker that flips silently is an operational blind spot. opossum emits events for every meaningful transition. Wire these to your logger and metrics so on-call engineers see the picture in real time.
open/halfOpen/close— state transitions.reject— a call rejected because the breaker was OPEN.timeout— a call exceeded the configured timeout.fallback— the fallback was invoked.success/failure— outcome of each fired call.
import { Logger } from '@nestjs/common';
import CircuitBreaker from 'opossum';
export function attachBreakerTelemetry(
breaker: CircuitBreaker,
name: string,
logger = new Logger('CircuitBreaker'),
) {
breaker.on('open', () => logger.error(`[${name}] OPEN - failing fast`));
breaker.on('halfOpen', () => logger.warn(`[${name}] HALF_OPEN - probing`));
breaker.on('close', () => logger.log(`[${name}] CLOSED - recovered`));
breaker.on('reject', () => logger.warn(`[${name}] call rejected (OPEN)`));
breaker.on('timeout', () => logger.warn(`[${name}] call timed out`));
breaker.on('fallback', () => logger.warn(`[${name}] fallback served`));
}Timeout Is Part of the Breaker
A common mistake is setting the breaker's timeout longer than the underlying HTTP client timeout. If your axios timeout is 30s but the breaker timeout is 3s, opossum gives up at 3s — good — but the socket may still be held open downstream.
Align them: set the breaker timeout slightly below the transport timeout, and make sure the transport actually aborts. The whole point is to bound how long any single call can pin a resource.
import { Module } from '@nestjs/common';
import { HttpModule } from '@nestjs/axios';
@Module({
imports: [
HttpModule.register({
timeout: 2500, // axios aborts the socket at 2.5s
maxRedirects: 0,
}),
],
})
export class DownstreamModule {}
// Breaker timeout (e.g. 2000ms) should sit just BELOW the axios timeout
// so opossum records the failure while the socket is still being released.One Breaker Per Dependency, Not Per App
Bulkheading means isolating failures so a sick dependency cannot drown a healthy one. Give each downstream its own breaker instance with thresholds tuned to its SLA.
- A flaky analytics service can trip without affecting payments.
- A latency-sensitive auth call gets a tight timeout; a batch report call gets a loose one.
- Per-dependency metrics make dashboards readable.
Do not share a single global breaker across unrelated calls — their statistics would contaminate each other.
import { Injectable } from '@nestjs/common';
import CircuitBreaker from 'opossum';
@Injectable()
export class BreakerRegistry {
private readonly breakers = new Map<string, CircuitBreaker>();
get<TArgs extends unknown[], TRet>(
name: string,
action: (...args: TArgs) => Promise<TRet>,
options: CircuitBreaker.Options,
): CircuitBreaker<TArgs, TRet> {
const existing = this.breakers.get(name);
if (existing) return existing as CircuitBreaker<TArgs, TRet>;
const breaker = new CircuitBreaker(action, options);
this.breakers.set(name, breaker);
return breaker;
}
}Exposing Breaker Health to Probes
Operationally you want breaker state visible in a health endpoint and scraped by Prometheus. opossum exposes breaker.stats (counts of success, failure, timeout, reject) and breaker.opened / breaker.halfOpen booleans.
A custom Terminus health indicator can report OPEN breakers as a degraded — not necessarily down — status, so orchestrators do not needlessly kill a pod that is correctly shedding load.
import { Injectable } from '@nestjs/common';
import { HealthIndicator, HealthIndicatorResult } from '@nestjs/terminus';
import CircuitBreaker from 'opossum';
@Injectable()
export class BreakerHealthIndicator extends HealthIndicator {
check(name: string, breaker: CircuitBreaker): HealthIndicatorResult {
const isUp = !breaker.opened;
return this.getStatus(name, isUp, {
state: breaker.opened ? 'open' : breaker.halfOpen ? 'half_open' : 'closed',
failures: breaker.stats.failures,
timeouts: breaker.stats.timeouts,
rejects: breaker.stats.rejects,
});
}
}Tuning Thresholds Sanely
Bad thresholds are worse than no breaker. Tune against real traffic:
- errorThresholdPercentage too low (e.g. 10%) trips on normal jitter; too high (e.g. 90%) defeats the purpose. 40-60% is a common starting band.
- resetTimeout too short hammers a recovering service; too long delays recovery. Start around 10-30s.
- Account for low traffic: with only 2 calls in the window, one failure is 50%. opossum's
volumeThresholdrequires a minimum number of calls before the percentage can trip.
import CircuitBreaker from 'opossum';
const options: CircuitBreaker.Options = {
timeout: 2000,
errorThresholdPercentage: 50,
resetTimeout: 15000,
rollingCountTimeout: 10000,
rollingCountBuckets: 10,
volumeThreshold: 10, // need >=10 calls in the window before % can trip
// errorFilter lets you NOT count expected errors (e.g. 404) as failures:
errorFilter: (err: { statusCode?: number }) => err?.statusCode === 404,
};
export { options };Quick Check: Choosing the Right Behavior
Test your understanding of how a circuit breaker behaves under load.
Recap
You now know how to keep a downstream failure from taking down your NestJS service:
- The pattern: a breaker moves between CLOSED, OPEN, and HALF_OPEN; OPEN means fail fast instead of waiting on timeouts.
- opossum: configure
timeout,errorThresholdPercentage,resetTimeout, andvolumeThreshold, then wrap the call withnew CircuitBreaker(action, options)and invokebreaker.fire(). - Build once: create the breaker in a provider/registry so rolling statistics persist — one breaker per dependency for bulkheading.
- Degrade: register a
fallback()for cached or safe-default responses. - Observe: hook the
open/close/reject/timeoutevents into logs and metrics, and surface state in a health probe.
Combined with retries (with backoff) and timeouts, circuit breakers are a cornerstone of resilient, SLO-friendly distributed systems.
Sıkça Sorulan Sorular
“Aşağı Akış Hataları için Devre Kesiciler” dersi ücretsiz mi?
Evet — “Aşağı Akış Hataları için Devre Kesiciler” dersin tüm metni burada web'de ücretsiz olarak okunabilir. Etkileşimli olarak pratik yapmak (yerleşik kod editörü ve 7/24 yapay zeka koçu) ve NestJS Enterprise Backend APIs kursunun geri kalanını açmak için CoddyKit PRO'ya yükselt. NestJS Enterprise Backend APIs kursu toplamda 4 dersten oluşur.
“Aşağı Akış Hataları için Devre Kesiciler” dersinde ne öğreneceğim?
Opossum tarzı devre kesici entegrasyonuyla hizmetleri zincirleme hatalardan koruyun. NestJS Enterprise Backend APIs ile uygulamalı kodu tarayıcıda doğrudan çalıştırarak pratik yaparsın ve 7/24 yapay zeka koçu dersi çalışırken sorularını yanıtlar.
NestJS Enterprise Backend APIs öğrenmeye başlamak için deneyim gerekli mi?
Önceden deneyim gerekmez. CoddyKit'te NestJS Enterprise Backend APIs, başlangıçtan ileri seviyeye kadar yapılandırıldığı için buradan başlayabilir veya başından başlayıp kendi hızında ilerleme yapabilirsin. Bu, 4 dersinin 2. dersidir.
“Aşağı Akış Hataları için Devre Kesiciler” dersi ne kadar sürer?
Çoğu CoddyKit dersi yaklaşık 5–10 dakika sürer. Her biri kısa ve etkileşimli olduğu için sabit ilerleme yaparsın ve web ile uygulama arasında tam olarak bıraktığın yerden devam edebilirsin.
Bu NestJS Enterprise Backend APIs dersinde kod yazıp çalıştırabilir miyim?
Evet. Her NestJS Enterprise Backend APIs dersi yerleşik bir kod editörü içerir, bu sayede tarayıcıda gerçek kod yazıp çalıştırabilir ve anlık yapay zeka geri bildirimi alırsın — yerel kurulum gerekli değildir.
Bu kursun tüm dersleri
- Interceptor'larla Zaman Aşımları, Yeniden Denemeler ve Yalıtım
- Aşağı Akış Hataları için Devre Kesiciler
- OpenTelemetry ile Dağıtık İzleme
- SLO'ları ve Hata Bütçelerini Tanımlama