0Pricing
Node.js Backend Development Bootcamp · Урок

Общий доступ к памяти с SharedArrayBuffer и Atomics

Синхронизируйте потоки через общую память с помощью Atomics, избегая копирования больших буферов и предотвращая состояния гонки.

«Общий доступ к памяти с SharedArrayBuffer и Atomics» — бесплатный урок Node.js Backend Development Bootcamp на CoddyKit. Это урок 3 из 4. Ты можешь прочитать весь урок бесплатно ниже — а потом практиковать его прямо в браузере с встроенным редактором кода и ИИ-репетитором 24/7. Это часть пути обучения Node.js Backend Development Bootcamp, и твой прогресс синхронизируется между веб-версией и приложением CoddyKit. Курс Node.js Backend Development Bootcamp содержит 4 уроков всего.

Части этого урока еще не переведены и отображаются на английском.

Why Shared Memory?

When you spin up a Worker in Node.js and call postMessage, the data you send is copied using the structured clone algorithm. For small messages that is fine, but for a large numeric buffer (millions of bytes) copying wastes CPU and memory.

  • SharedArrayBuffer lets multiple threads read and write the same block of memory with zero copying.
  • Atomics gives you safe, race-free operations on that memory.

This lesson shows how to coordinate threads over shared memory in a CPU-bound backend job.

ArrayBuffer vs SharedArrayBuffer

An ArrayBuffer is owned by one thread. When transferred to a worker, the sender loses access to it. A SharedArrayBuffer (SAB) is different: passing it to a worker shares the same backing store, so both threads see each other's writes.

You never read raw bytes directly. Instead you wrap the buffer in a typed array view such as Int32Array or Float64Array.

const sab = new SharedArrayBuffer(16);
const view = new Int32Array(sab);

console.log(view.length);
view[0] = 42;
console.log(view[0]);
console.log(sab.byteLength);

Passing a SAB to a Worker

To share memory, create the SharedArrayBuffer in the main thread and send it via postMessage. Unlike a normal buffer, a SAB is shared (not transferred), so both sides keep using it.

The worker wraps the same SAB in its own typed array view. No copy happens.

const { Worker, isMainThread, workerData } = require('worker_threads');

if (isMainThread) {
  const sab = new SharedArrayBuffer(4);
  const view = new Int32Array(sab);
  view[0] = 100;
  new Worker(__filename, { workerData: sab });
} else {
  const view = new Int32Array(workerData);
  view[0] += 1;
  console.log('worker sees', view[0]);
}

The Race Condition Problem

Plain reads and writes on a shared view are not safe when multiple threads touch the same slot. A statement like view[0] += 1 is really three steps: read, add, write. Two threads can interleave and lose updates.

  • Thread A reads 5, Thread B reads 5.
  • Both compute 6 and write 6.
  • Two increments happened, but the value only went up by one.

This is a classic data race. The fix is Atomics.

Atomics.add for Safe Counters

Atomics.add(view, index, value) performs read-modify-write as a single indivisible operation. No other thread can interleave, so increments are never lost.

Other useful methods: Atomics.sub, Atomics.and, Atomics.or, and Atomics.load / Atomics.store for plain reads and writes that are guaranteed visible across threads.

const sab = new SharedArrayBuffer(4);
const counter = new Int32Array(sab);

Atomics.store(counter, 0, 0);
Atomics.add(counter, 0, 5);
Atomics.add(counter, 0, 3);

console.log(Atomics.load(counter, 0));

Splitting CPU Work Across Threads

Imagine summing a huge array of integers, a CPU-bound task that would block the event loop. With shared memory you store the data once and let several workers each process a slice, writing partial results into a shared output slot via Atomics.add.

Because the input lives in a SharedArrayBuffer, you never copy the dataset to each worker. They all read the same bytes.

Compare-and-Exchange

Atomics.compareExchange(view, index, expected, replacement) writes replacement only if the current value equals expected, and returns the value that was there. This is the building block for lock-free algorithms and simple spinlocks.

Use it to claim a slot exactly once: if the swap succeeds, this thread won the claim.

const sab = new SharedArrayBuffer(4);
const slot = new Int32Array(sab);
Atomics.store(slot, 0, 0);

const prev = Atomics.compareExchange(slot, 0, 0, 1);
console.log('previous value was', prev);
console.log('claimed:', prev === 0);

const again = Atomics.compareExchange(slot, 0, 0, 1);
console.log('second claim succeeded:', again === 0);

Blocking with Atomics.wait

Sometimes a worker must pause until another thread signals it. Atomics.wait(view, index, expectedValue) blocks the calling thread while the slot still holds expectedValue. It returns 'ok', 'not-equal', or 'timed-out'.

  • Atomics.wait only works off the main thread (it would freeze the event loop otherwise).
  • Atomics.notify(view, index, count) wakes waiting threads.

This gives you a true thread barrier without busy-looping.

Notify to Wake Workers

The producer thread updates the shared slot with Atomics.store and then calls Atomics.notify to wake any thread parked in Atomics.wait. The order matters: change the value first, then notify.

In a real backend job this is how a coordinator releases all workers at once to start a phase, or signals that input is ready.

const { Worker, isMainThread, workerData } = require('worker_threads');

if (isMainThread) {
  const sab = new SharedArrayBuffer(4);
  const signal = new Int32Array(sab);
  Atomics.store(signal, 0, 0);
  new Worker(__filename, { workerData: sab });
  setTimeout(() => {
    Atomics.store(signal, 0, 1);
    Atomics.notify(signal, 0, 1);
  }, 50);
} else {
  const signal = new Int32Array(workerData);
  Atomics.wait(signal, 0, 0);
  console.log('worker released, value =', Atomics.load(signal, 0));
}

A Complete Parallel Sum

Here is the full pattern in one runnable file: a shared input buffer, a shared result slot, and two workers that each sum half the data and atomically add their partial into the result. The main thread waits for both to finish.

Notice the input is never copied; both workers read the same SharedArrayBuffer.

const { Worker, isMainThread, workerData } = require('worker_threads');

if (isMainThread) {
  const N = 1000;
  const dataSab = new SharedArrayBuffer(N * 4);
  const data = new Int32Array(dataSab);
  for (let i = 0; i < N; i++) data[i] = i + 1;

  const resultSab = new SharedArrayBuffer(8);
  const result = new Int32Array(resultSab);
  Atomics.store(result, 0, 0);
  Atomics.store(result, 1, 0);

  let done = 0;
  const ranges = [[0, N / 2], [N / 2, N]];
  for (const [start, end] of ranges) {
    const w = new Worker(__filename, { workerData: { dataSab, resultSab, start, end } });
    w.on('exit', () => {
      if (++done === ranges.length) {
        console.log('total =', Atomics.load(result, 0));
      }
    });
  }
} else {
  const { dataSab, resultSab, start, end } = workerData;
  const data = new Int32Array(dataSab);
  const result = new Int32Array(resultSab);
  let local = 0;
  for (let i = start; i < end; i++) local += data[i];
  Atomics.add(result, 0, local);
}

Practical Cautions

Shared memory is powerful but easy to misuse. Keep these rules in mind:

  • SharedArrayBuffer only stores numbers. To share strings or objects you must encode them (for example with TextEncoder into a Uint8Array).
  • Always use Atomics for any slot more than one thread might write; mixing plain writes and atomic writes reintroduces races.
  • Reserve a fixed slot for synchronization flags and document its index.
  • Use shared memory only when copying is a real bottleneck; for most messages plain postMessage is simpler and safe.

Quick Check

You have several worker threads incrementing one shared counter stored in an Int32Array backed by a SharedArrayBuffer. Which approach keeps the count correct under concurrency?

Recap

You learned how to coordinate Node.js worker threads over shared memory:

  • SharedArrayBuffer shares one backing store across threads with no copying; wrap it in a typed array like Int32Array.
  • Plain += on a shared slot causes data races; use Atomics for any concurrently written slot.
  • Atomics.add, Atomics.load, Atomics.store, and Atomics.compareExchange give race-free reads, writes, and lock-free claims.
  • Atomics.wait (off the main thread) plus Atomics.notify let threads block and signal without busy-looping.
  • Reach for shared memory only when copying large numeric buffers is a real bottleneck.

Часто задаваемые вопросы

Урок «Общий доступ к памяти с SharedArrayBuffer и Atomics» бесплатный?

Да — полный текст урока «Общий доступ к памяти с SharedArrayBuffer и Atomics» бесплатно доступен здесь в веб-версии. Чтобы практиковать его интерактивно (встроенный редактор кода и ИИ-репетитор 24/7) и разблокировать остальной курс Node.js Backend Development Bootcamp, подпишись на CoddyKit PRO. Курс Node.js Backend Development Bootcamp содержит 4 уроков всего.

Чему я научусь в уроке «Общий доступ к памяти с SharedArrayBuffer и Atomics»?

Синхронизируйте потоки через общую память с помощью Atomics, избегая копирования больших буферов и предотвращая состояния гонки. Ты практикуешь Node.js Backend Development Bootcamp с помощью реального кода, который запускаешь прямо в браузере, и ИИ-репетитор 24/7 отвечает на твои вопросы во время урока.

Нужен ли мне опыт, чтобы начать Node.js Backend Development Bootcamp?

Предыдущий опыт не требуется. Node.js Backend Development Bootcamp на CoddyKit структурирован для всех уровней — от новичков до продвинутых, поэтому ты можешь начать отсюда или с самого начала и учиться в своем темпе. Это урок 3 из 4.

Сколько времени занимает урок «Общий доступ к памяти с SharedArrayBuffer и Atomics»?

Большинство уроков CoddyKit занимают около 5–10 минут. Каждый из них компактный и интерактивный, поэтому ты постоянно делаешь прогресс и продолжаешь с того же места в веб-версии и приложении.

Можно ли писать и запускать код в этом уроке Node.js Backend Development Bootcamp?

Да. Каждый урок Node.js Backend Development Bootcamp включает встроенный редактор кода, поэтому ты пишешь и запускаешь реальный код прямо в браузере и получаешь моментальную обратную связь от AI — локальная установка не требуется.

Все уроки этого курса

  1. Почему цикл событий останавливается на задачах, ограниченных CPU
  2. Создание рабочих потоков и передача сообщений
  3. Общий доступ к памяти с SharedArrayBuffer и Atomics
  4. Создание повторно используемого пула рабочих потоков для пропускной способности
← Назад к Node.js Backend Development Bootcamp