Claude Architect · Урок

Обзор агентного цикла

Отправьте запрос, проверьте stop_reason, запустите инструменты и повторите

«Обзор агентного цикла» — бесплатный урок Claude Architect на CoddyKit. Это урок 4 из 4. Ты можешь прочитать весь урок бесплатно ниже — а потом практиковать его прямо в браузере с встроенным редактором кода и ИИ-репетитором 24/7. Это часть пути обучения Claude Architect, и твой прогресс синхронизируется между веб-версией и приложением CoddyKit. Курс Claude Architect содержит 4 уроков всего.

Части этого урока еще не переведены и отображаются на английском.

What Is the Agentic Loop?

An agent is just a loop around the Claude Messages API. You send a request, Claude either finishes or asks to run a tool, you run it, and you send the results back. Repeat until Claude is done.

The whole pattern is four steps:

Request — call the API with your message history.
Inspect the stop_reason in the response.
Run tools if Claude asked for them, then add the results to the history.
Repeat until stop_reason is end_turn.

Master this one loop and you understand the core of every agent.

The Request: Full History Every Turn

The Claude API is stateless. The model keeps no memory between calls, so you must send the full message history every single turn.

A request carries these fields:

model — which Claude model to use.
max_tokens — the output cap.
system — the system prompt.
messages — the entire conversation so far.
tools — the tools Claude may call.

If you forget to append a turn, Claude simply won't know it happened.

import anthropic

client = anthropic.Anthropic()

response = client.messages.create(
    model="claude-opus-4-8",
    max_tokens=1024,
    system="You are a helpful weather assistant.",
    tools=tools,
    messages=messages,  # the FULL history, every turn
)

The Response: Read stop_reason

Every response comes back with a stop_reason. This field — not the text — tells you what to do next. The four values are:

end_turn — Claude finished. The loop is over.
tool_use — Claude wants a tool run. Execute it and continue.
max_tokens — output was truncated by the limit.
stop_sequence — a custom stop sequence was hit.

Your loop is really just a decision based on this one field.

if response.stop_reason == "end_turn":
    # Done — return the answer
    ...
elif response.stop_reason == "tool_use":
    # Run the requested tool(s), then loop again
    ...

Defining a Tool

A tool is a function you let Claude call. You describe it with a name, a description, and a JSON Schema for its inputs.

The description is the most important part — Claude reads it to decide when to use the tool. Be clear about its purpose, its inputs, and when it applies.

Claude never runs your tool itself. It only asks for it; your code does the actual work and reports back.

tools = [
    {
        "name": "get_weather",
        "description": "Get the current weather for a city. "
                       "Call this when the user asks about weather "
                       "or temperature.",
        "input_schema": {
            "type": "object",
            "properties": {
                "city": {"type": "string", "description": "City name"}
            },
            "required": ["city"],
        },
    }
]

When Claude Asks for a Tool

When stop_reason is tool_use, the response content contains a tool_use block. It carries:

an id — used to match the result back to the request,
a name — which tool to run,
an input — the arguments, already parsed as an object.

Claude can ask for several tools in one response. Run them all before continuing.

for block in response.content:
    if block.type == "tool_use":
        print(block.name)   # "get_weather"
        print(block.input)  # {"city": "Paris"}
        print(block.id)     # "toolu_01A..." -> needed for the result

Sending the Result Back

To continue, you append two things to the history:

The assistant's full response.content (so the tool_use block is preserved).
A new user message holding a tool_result block.

Each tool_result must include the matching tool_use_id. Then you call the API again — that's one turn of the loop.

result = run_tool(block.name, block.input)

messages.append({"role": "assistant", "content": response.content})
messages.append({
    "role": "user",
    "content": [{
        "type": "tool_result",
        "tool_use_id": block.id,   # must match the tool_use id
        "content": result,
    }],
})

The Full Loop in Code

Put it together and the agent is a short while loop:

Call the API with the full history.
If stop_reason is end_turn, break.
Otherwise run the requested tools, append the results, and loop.

The model drives the decisions; your code just runs the tools and carries the history.

while True:
    response = client.messages.create(
        model="claude-opus-4-8", max_tokens=1024,
        tools=tools, messages=messages,
    )
    if response.stop_reason == "end_turn":
        break
    messages.append({"role": "assistant", "content": response.content})
    results = [
        {"type": "tool_result", "tool_use_id": b.id,
         "content": run_tool(b.name, b.input)}
        for b in response.content if b.type == "tool_use"
    ]
    messages.append({"role": "user", "content": results})

Terminate on stop_reason, Not Text

Here is the rule that separates a robust agent from a fragile one: always terminate on stop_reason, never by reading the text.

Scanning Claude's output for words like "done", "finished", or "complete" is a classic anti-pattern. The model might say "I'm not done yet" or mention the word "done" in a sentence, and your loop breaks at the wrong moment.

The stop_reason field is the one reliable signal. Trust it.

# WRONG — fragile text parsing
if "done" in response_text.lower():
    break

# RIGHT — structural signal
if response.stop_reason == "end_turn":
    break

Iteration Caps Are a Safety Net

It's wise to add a maximum-iteration counter so a misbehaving loop can't run forever. But understand its role: a cap is a safety net, not the primary way you stop.

The primary stop mechanism is always stop_reason == end_turn. The cap only catches the rare runaway case.

Treating an arbitrary iteration cap as your main stop condition is an anti-pattern — it cuts off legitimate work that just needed one more turn.

MAX_ITERS = 20  # safety net only
for _ in range(MAX_ITERS):
    response = client.messages.create(...)
    if response.stop_reason == "end_turn":
        break          # the REAL stop condition
    # ... run tools, append results ...

Model-Driven Decisions, Coded Guarantees

In the agentic loop, the model decides what to do: which tool to call, with what inputs, and when to stop. That flexibility is the whole point of an agent.

Reserve hard code for the things you must guarantee — for example, a deterministic check that a refund can't exceed a policy limit, or that an action only runs after identity is verified.

Let the model plan; let your code enforce. Don't hard-code the trajectory, and don't ask a prompt to enforce a critical rule.

Handling the Other Stop Reasons

Two stop reasons are easy to forget but matter in production:

max_tokens — the output hit the limit and is truncated. Raise max_tokens or stream, then retry; don't treat partial output as final.
stop_sequence — a custom stop sequence you configured was matched.

A complete loop branches on all four values. Silently ignoring max_tokens leads to cut-off answers and broken tool calls.

if response.stop_reason == "end_turn":
    finish()
elif response.stop_reason == "tool_use":
    run_tools_and_continue()
elif response.stop_reason == "max_tokens":
    # truncated — raise max_tokens / stream and retry
    handle_truncation()
elif response.stop_reason == "stop_sequence":
    handle_stop_sequence()

Quick Check

Test your understanding of how to terminate the agentic loop.

Recap: The Agentic Loop

You now know the engine behind every agent:

Request the API with the full history every turn — the model keeps no state.
Inspect stop_reason: end_turn (done), tool_use (run tools), max_tokens (truncated), stop_sequence.
On tool_use, run the tools and append each tool_result with its matching tool_use_id.
Repeat until end_turn.

Terminate on stop_reason, never by parsing text. Iteration caps are a safety net only. Let the model make decisions; reserve hard code for guarantees.

Часто задаваемые вопросы

Урок «Обзор агентного цикла» бесплатный?

Да — полный текст урока «Обзор агентного цикла» бесплатно доступен здесь в веб-версии. Чтобы практиковать его интерактивно (встроенный редактор кода и ИИ-репетитор 24/7) и разблокировать остальной курс Claude Architect, подпишись на CoddyKit PRO. Курс Claude Architect содержит 4 уроков всего.

Чему я научусь в уроке «Обзор агентного цикла»?

Отправьте запрос, проверьте stop_reason, запустите инструменты и повторите Ты практикуешь Claude Architect с помощью реального кода, который запускаешь прямо в браузере, и ИИ-репетитор 24/7 отвечает на твои вопросы во время урока.

Нужен ли мне опыт, чтобы начать Claude Architect?

Предыдущий опыт не требуется. Claude Architect на CoddyKit структурирован для всех уровней — от новичков до продвинутых, поэтому ты можешь начать отсюда или с самого начала и учиться в своем темпе. Это урок 4 из 4.

Сколько времени занимает урок «Обзор агентного цикла»?

Большинство уроков CoddyKit занимают около 5–10 минут. Каждый из них компактный и интерактивный, поэтому ты постоянно делаешь прогресс и продолжаешь с того же места в веб-версии и приложении.

Можно ли писать и запускать код в этом уроке Claude Architect?

Да. Каждый урок Claude Architect включает встроенный редактор кода, поэтому ты пишешь и запускаешь реальный код прямо в браузере и получаешь моментальную обратную связь от AI — локальная установка не требуется.

Все уроки этого курса

Что делает систему агентной
Решения на основе модели и жёстко заданные решения
Когда использовать агента
Обзор агентного цикла

← Назад к Claude Architect