0Pricing
Claude Architect · Урок

Анатомия запроса к API

model, max_tokens, system, messages, tools, tool_choice

«Анатомия запроса к API» — бесплатный урок Claude Architect на CoddyKit. Это урок 2 из 4. Ты можешь прочитать весь урок бесплатно ниже — а потом практиковать его прямо в браузере с встроенным редактором кода и ИИ-репетитором 24/7. Это часть пути обучения Claude Architect, и твой прогресс синхронизируется между веб-версией и приложением CoddyKit. Курс Claude Architect содержит 4 уроков всего.

Части этого урока еще не переведены и отображаются на английском.

The Single Endpoint

Every call to Claude is one request to the Messages API. As an architect, you don't memorize syntax — you reason about six fields that shape the whole interaction: model, max_tokens, system, messages, tools, and tool_choice.

Get these right and everything downstream — agents, tool loops, structured output — falls into place. This lesson walks through each field and the decision it represents.

from anthropic import Anthropic

client = Anthropic()
response = client.messages.create(
    model="claude-opus-4-8",
    max_tokens=1024,
    system="You are a concise assistant.",
    messages=[{"role": "user", "content": "Hello!"}],
)
print(response.content[0].text)

model — Which Brain

The model field selects which Claude does the work. It's a single string, and the choice is a real architectural trade-off: capability versus latency versus cost.

  • Opus — most capable, best for long-horizon agentic and hard reasoning.
  • Sonnet — strong balance of speed and intelligence.
  • Haiku — fastest and cheapest for simple, high-volume tasks.

You can change the model per request, so route easy tasks to a cheaper model and hard ones to a stronger one.

# Same request shape, different routing decision
response = client.messages.create(
    model="claude-opus-4-8",  # swap to a cheaper model for simple tasks
    max_tokens=1024,
    messages=[{"role": "user", "content": "Summarize this ticket."}],
)

max_tokens — The Output Ceiling

max_tokens is a hard cap on how many tokens Claude may generate in this response. The model is not told this number — it's an enforced ceiling, not a hint.

If generation hits the cap, the response is cut off and stop_reason comes back as "max_tokens". That means the answer is truncated, not complete. Set it high enough to finish the job; for very long outputs, stream so you don't hit request timeouts.

response = client.messages.create(
    model="claude-opus-4-8",
    max_tokens=4096,  # generous ceiling so the answer isn't cut off
    messages=[{"role": "user", "content": "Write a detailed migration plan."}],
)
if response.stop_reason == "max_tokens":
    print("Truncated — raise max_tokens or stream.")

system — Persona and Rules

The system prompt sets Claude's role, tone, and standing rules — the instructions that apply to the whole conversation rather than to one user turn.

Put durable behavior here: "You are a support agent. Verify the customer's identity before any account action." Keep it stable across requests — a frozen system prompt also caches well, which lowers cost and latency on repeated calls.

SYSTEM = (
    "You are a customer-support agent for an online store. "
    "Always verify the customer's identity before discussing an order. "
    "Be warm, concise, and never invent order details."
)

response = client.messages.create(
    model="claude-opus-4-8",
    max_tokens=1024,
    system=SYSTEM,
    messages=[{"role": "user", "content": "Where is my order?"}],
)

messages — The Whole History

This is the field architects get wrong most often. The Messages API is stateless: the model keeps NO memory between requests. On every turn you resend the full conversation history — every prior user and assistant turn, plus any tool results.

If you only send the latest user message, Claude has amnesia. Conversation state lives in your application; you replay it each call. Messages alternate roles, and the first message must be user.

messages = [
    {"role": "user", "content": "My name is Alice."},
    {"role": "assistant", "content": "Hi Alice!"},
    {"role": "user", "content": "What's my name?"},  # only works because history is resent
]
response = client.messages.create(
    model="claude-opus-4-8", max_tokens=256, messages=messages,
)

tools — Giving Claude Hands

The tools field is a list of actions Claude may call — each with a name, an input_schema (JSON Schema), and most importantly a description.

The description is the primary way Claude decides which tool to use — not the name. A good description states the tool's purpose, its return values, input formats with examples, and when NOT to use it. Vague or overlapping descriptions cause misrouting. Keep the set tight: about 4–5 tools per agent is optimal; piling on 18+ degrades selection reliability.

tools = [{
    "name": "get_customer",
    "description": (
        "Look up a customer by verified email or account ID. "
        "Returns name, tier, and a verified customer_id. "
        "Call this FIRST before any account action; do not guess IDs."
    ),
    "input_schema": {
        "type": "object",
        "properties": {"email": {"type": "string"}},
        "required": ["email"],
    },
}]

tool_choice — Who Decides

tool_choice controls whether and how Claude calls a tool:

  • {"type": "auto"} — Claude decides whether to reply with text or call a tool (the default).
  • {"type": "any"} — Claude MUST call some tool. This is how you guarantee structured output.
  • {"type": "tool", "name": "X"} — force one specific tool.

Use any or a forced tool when you need a machine-readable result every time; use auto for open conversation where a plain answer is sometimes correct.

response = client.messages.create(
    model="claude-opus-4-8",
    max_tokens=1024,
    tools=tools,
    tool_choice={"type": "any"},  # force SOME tool -> structured result guaranteed
    messages=[{"role": "user", "content": "Find the customer alice@shop.com"}],
)

stop_reason — Reading the Outcome

Every response carries a stop_reason that tells you what to do next. Architects branch on it — they never parse the text looking for words like "done".

  • "end_turn" — Claude finished naturally; the turn is complete.
  • "tool_use" — Claude wants a tool run; execute it, append the result, continue.
  • "max_tokens" — output was truncated by the ceiling.
  • "stop_sequence" — a configured stop string was hit.

This single field is the control signal for the entire agentic loop.

response = client.messages.create(
    model="claude-opus-4-8", max_tokens=1024,
    tools=tools, messages=messages,
)

if response.stop_reason == "tool_use":
    pass   # run the tool, append result, call again
elif response.stop_reason == "end_turn":
    pass   # complete
elif response.stop_reason == "max_tokens":
    pass   # truncated -> raise max_tokens

The Agentic Loop

Tools, messages, and stop_reason combine into the core pattern: request → inspect stop_reason → if tool_use, run the tools and append results to history → repeat until end_turn.

Because the API is stateless, you append the assistant's tool request AND the tool result back into messages before the next call. Termination is driven by stop_reason — decisions are model-driven. Any iteration cap you add is a safety net, never the primary stop mechanism.

while True:
    resp = client.messages.create(
        model="claude-opus-4-8", max_tokens=1024,
        tools=tools, messages=messages,
    )
    messages.append({"role": "assistant", "content": resp.content})
    if resp.stop_reason != "tool_use":
        break  # terminate on stop_reason, NOT on text
    results = run_tools(resp.content)          # execute each tool_use block
    messages.append({"role": "user", "content": results})

Why Statelessness Matters

Statelessness isn't a limitation to work around — it's the design that makes Claude predictable and scalable. Because the model holds no hidden state, the request is the complete truth: same six fields plus the same history produce the same behavior.

This is why context management is its own discipline. As history grows you trim verbose tool output to the relevant fields, summarize old turns, and keep critical transactional facts (IDs, amounts, dates) verbatim in a dedicated block — because the model only knows what you put back in messages.

Putting It Together

A production request is rarely just a model and a prompt. A support-agent turn combines all six fields: a routed model, a safe max_tokens, a rules-bearing system, the full messages history, a tight tools set, and a tool_choice that matches the task.

Read these six fields off any request and you can predict exactly how it will behave — that's the architect's lens.

response = client.messages.create(
    model="claude-opus-4-8",                 # routed by task difficulty
    max_tokens=2048,                          # room to finish
    system="You are a support agent. Verify identity first.",
    messages=conversation_history,            # full replay, stateless
    tools=support_tools,                      # 4-5 well-described tools
    tool_choice={"type": "auto"},             # text or tool, model decides
)

Quick Check

Test your understanding of how request fields drive behavior.

Key Takeaways

You now have the architect's mental model of a Claude request:

  • model — capability vs. cost vs. latency; route per task.
  • max_tokens — enforced output ceiling; stop_reason: "max_tokens" means truncated.
  • system — durable persona and rules; keep it stable.
  • messages — the FULL history, resent every turn, because the model holds no state.
  • tools — descriptions drive selection; keep to ~4–5 well-scoped tools.
  • tool_choice — auto / any / forced; use any to guarantee structured output.

And the loop that ties them together: drive it on stop_reason (end_turn vs tool_use), never by parsing text. Master these and the rest of the certification builds on solid ground.

Часто задаваемые вопросы

Урок «Анатомия запроса к API» бесплатный?

Да — полный текст урока «Анатомия запроса к API» бесплатно доступен здесь в веб-версии. Чтобы практиковать его интерактивно (встроенный редактор кода и ИИ-репетитор 24/7) и разблокировать остальной курс Claude Architect, подпишись на CoddyKit PRO. Курс Claude Architect содержит 4 уроков всего.

Чему я научусь в уроке «Анатомия запроса к API»?

model, max_tokens, system, messages, tools, tool_choice Ты практикуешь Claude Architect с помощью реального кода, который запускаешь прямо в браузере, и ИИ-репетитор 24/7 отвечает на твои вопросы во время урока.

Нужен ли мне опыт, чтобы начать Claude Architect?

Предыдущий опыт не требуется. Claude Architect на CoddyKit структурирован для всех уровней — от новичков до продвинутых, поэтому ты можешь начать отсюда или с самого начала и учиться в своем темпе. Это урок 2 из 4.

Сколько времени занимает урок «Анатомия запроса к API»?

Большинство уроков CoddyKit занимают около 5–10 минут. Каждый из них компактный и интерактивный, поэтому ты постоянно делаешь прогресс и продолжаешь с того же места в веб-версии и приложении.

Можно ли писать и запускать код в этом уроке Claude Architect?

Да. Каждый урок Claude Architect включает встроенный редактор кода, поэтому ты пишешь и запускаешь реальный код прямо в браузере и получаешь моментальную обратную связь от AI — локальная установка не требуется.

Все уроки этого курса

  1. Семейство моделей Claude
  2. Анатомия запроса к API
  3. Причины остановки
  4. Токены, окна контекста и стоимость
← Назад к Claude Architect