AMM и пулы ликвидности
Разберитесь, как работают автоматизированные маркетмейкеры (AMM), такие как Uniswap, и как пулы ликвидности обеспечивают децентрализованную торговлю.
«AMM и пулы ликвидности» — бесплатный урок Blockchain Smart Contracts with Solidity на CoddyKit. Это урок 1 из 4. Ты можешь прочитать весь урок бесплатно ниже — а потом практиковать его прямо в браузере с встроенным редактором кода и ИИ-репетитором 24/7. Это часть пути обучения Blockchain Smart Contracts with Solidity, и твой прогресс синхронизируется между веб-версией и приложением CoddyKit. Курс Blockchain Smart Contracts with Solidity содержит 4 уроков всего.
Части этого урока еще не переведены и отображаются на английском.
Welcome to AMMs
Decentralized Finance (DeFi) has revolutionized how we trade assets. At its heart are Automated Market Makers (AMMs).
AMMs power decentralized exchanges (DEXs) like Uniswap, allowing users to swap tokens without traditional buyers and sellers.
Instead of matching orders, AMMs use mathematical formulas and liquidity pools.
Order Books vs. AMMs
Traditional exchanges use order books, where buyers and sellers list their desired prices. Trades only happen when bids and asks match.
- Order Books: Centralized, requires matching orders, can suffer from low liquidity.
- AMMs: Decentralized, uses liquidity pools, always offers a price determined by a formula.
AMMs solve the liquidity problem for many token pairs on a blockchain by always providing a market.
The Power of Liquidity Pools
An AMM's backbone is the liquidity pool. This is a collection of two or more tokens locked in a smart contract.
For example, a common pool might hold ETH and a stablecoin like DAI. Users can swap between these tokens directly from the pool.
These pools are funded by individuals called Liquidity Providers (LPs).
Meet the Constant Product Formula
Most AMMs, like Uniswap, use the constant product formula: x * y = k.
xis the quantity of the first token.yis the quantity of the second token.kis a constant product that must remain unchanged after a trade.
When you swap tokens, the quantities of x and y change, but their product k stays the same, determining the new price ratio.
How to Become an LP
Liquidity Providers (LPs) deposit an equal value of two tokens into a liquidity pool. For example, $1000 worth of ETH and $1000 worth of DAI.
In return, LPs receive Liquidity Pool (LP) tokens. These tokens represent their share of the pool.
LP tokens can be redeemed later to withdraw your original deposit plus any accumulated fees.
Adding Liquidity in Practice
When an LP adds liquidity, they increase the total supply of x and y in the pool, which also increases the constant k.
The AMM smart contract ensures that tokens are added in the correct ratio to maintain the pool's balance and prevent immediate price changes.
This process makes the pool deeper, allowing for larger trades with less price impact.
Swapping Tokens
When a user wants to swap Token A for Token B, they send Token A to the liquidity pool.
The AMM's smart contract then calculates how much Token B to give back, based on the x * y = k formula.
The pool's balance shifts, and the price of the tokens adjusts automatically according to the formula.
Code Example: Simulating a Swap
Let's see a simplified Solidity contract that simulates how an AMM might perform a swap using the constant product formula.
This example demonstrates the core calculation and reserve update.
pragma solidity ^0.8.0;
contract SimpleAmmSwap {
uint public tokenXReserve = 1000 * 10**18; // 1000 tokens (e.g., ETH) with 18 decimals
uint public tokenYReserve = 1000 * 10**18; // 1000 tokens (e.g., DAI) with 18 decimals
uint public k = tokenXReserve * tokenYReserve;
// Simulate a swap from Token X to Token Y
// For simplicity, no actual token transfers, just reserve updates.
function swapXForY(uint amountInX) public returns (uint amountOutY) {
require(amountInX > 0, "Amount in must be positive");
// Calculate new reserves and output amount
uint newXReserve = tokenXReserve + amountInX;
uint newYReserve = k / newXReserve;
amountOutY = tokenYReserve - newYReserve;
require(amountOutY > 0, "Not enough liquidity for swap");
// Update reserves
tokenXReserve = newXReserve;
tokenYReserve = newYReserve;
// Note: In a real AMM, actual token transfers would occur here.
}
// A getter to check current reserves
function getReserves() public view returns (uint, uint) {
return (tokenXReserve, tokenYReserve);
}
}Understanding Impermanent Loss
One major risk for LPs is impermanent loss. This occurs when the price of the assets in the liquidity pool changes relative to when you deposited them.
If the price ratio diverges significantly, the value of your tokens withdrawn from the pool might be less than if you had simply held them outside the pool.
It's called "impermanent" because the loss only becomes permanent if you withdraw your liquidity before the prices return to their original ratio.
LP Fees and Rewards
Despite impermanent loss, LPs are incentivized by earning a share of the trading fees generated by the pool.
Each time a trade occurs, a small percentage (e.g., 0.3%) of the swapped amount is added to the liquidity pool.
These fees accumulate in the pool and are distributed proportionally to LPs when they withdraw their liquidity, compensating them for providing capital and taking on impermanent loss risk.
Quick Check: AMM Basics
Test your understanding of Automated Market Makers and Liquidity Pools.
Recap: AMMs & Liquidity Pools
We've explored how Automated Market Makers (AMMs) provide decentralized trading by using liquidity pools instead of traditional order books.
Key takeaways:
- AMMs use formulas like
x * y = kto determine prices. - Liquidity Providers (LPs) fund pools and earn trading fees.
- Impermanent loss is a risk for LPs due to price divergence.
Understanding these concepts is vital for navigating the DeFi landscape!
Часто задаваемые вопросы
Урок «AMM и пулы ликвидности» бесплатный?
Да — полный текст урока «AMM и пулы ликвидности» бесплатно доступен здесь в веб-версии. Чтобы практиковать его интерактивно (встроенный редактор кода и ИИ-репетитор 24/7) и разблокировать остальной курс Blockchain Smart Contracts with Solidity, подпишись на CoddyKit PRO. Курс Blockchain Smart Contracts with Solidity содержит 4 уроков всего.
Чему я научусь в уроке «AMM и пулы ликвидности»?
Разберитесь, как работают автоматизированные маркетмейкеры (AMM), такие как Uniswap, и как пулы ликвидности обеспечивают децентрализованную торговлю. Ты практикуешь Blockchain Smart Contracts with Solidity с помощью реального кода, который запускаешь прямо в браузере, и ИИ-репетитор 24/7 отвечает на твои вопросы во время урока.
Нужен ли мне опыт, чтобы начать Blockchain Smart Contracts with Solidity?
Предыдущий опыт не требуется. Blockchain Smart Contracts with Solidity на CoddyKit структурирован для всех уровней — от новичков до продвинутых, поэтому ты можешь начать отсюда или с самого начала и учиться в своем темпе. Это урок 1 из 4.
Сколько времени занимает урок «AMM и пулы ликвидности»?
Большинство уроков CoddyKit занимают около 5–10 минут. Каждый из них компактный и интерактивный, поэтому ты постоянно делаешь прогресс и продолжаешь с того же места в веб-версии и приложении.
Можно ли писать и запускать код в этом уроке Blockchain Smart Contracts with Solidity?
Да. Каждый урок Blockchain Smart Contracts with Solidity включает встроенный редактор кода, поэтому ты пишешь и запускаешь реальный код прямо в браузере и получаешь моментальную обратную связь от AI — локальная установка не требуется.
Все уроки этого курса
- AMM и пулы ликвидности
- Протоколы кредитования и заимствования
- Флеш-кредиты и арбитраж
- Фарминг доходности и награды за стейкинг