Adicione placas ESP à IDE
Instale o pacote da placa e selecione o chip.
Adicione placas ESP à IDE é uma aula grátis de Arduino & IoT Academy no CoddyKit. Esta é a aula 2 de 4. Você pode ler a aula completa abaixo gratuitamente — depois pratica ao vivo no navegador com um editor de código integrado e um tutor de IA 24/7. Faz parte do caminho de aprendizado de Arduino & IoT Academy, e seu progresso é sincronizado entre a web e o app CoddyKit. O curso de Arduino & IoT Academy inclui 4 aulas no total.
Partes desta aula ainda não foram traduzidas e aparecem em inglês.
The IDE Needs a Hint
Out of the box, the Arduino IDE only knows Arduino boards. To flash an ESP chip, you first teach the IDE where to find it. 🧩
Board Manager URLs
ESP support arrives through a Board Manager URL. It is a web link that tells the IDE where the board files live online.
Open Preferences
Start in File > Preferences. Near the bottom you will find the box labeled Additional Boards Manager URLs.
Paste the ESP32 URL
For the ESP32, paste Espressif's official package URL into that box. It points straight at the latest board definitions.
https://espressif.github.io/arduino-esp32/package_esp32_index.jsonESP8266 Has Its Own
Using an ESP8266 instead? It needs a different URL. You can list several in the box, separated by commas, and keep both.
http://arduino.esp8266.com/stable/package_esp8266com_index.jsonOpen Boards Manager
Now go to Tools > Board > Boards Manager. This is the catalog where every installable board package shows up.
Search for Your Chip
Type esp32 or esp8266 into the search field. The matching package appears, ready for you to install with one click.
Click Install
Press Install and wait. The IDE downloads the compiler and tools for your chip, which can take a minute on the first run.
Find Your Board in the List
After it finishes, reopen Tools > Board. A fresh section now lists your ESP boards alongside the classic Arduino ones.
Select the Exact Model
Pick the precise model, like ESP32 Dev Module or NodeMCU. Choosing the wrong variant is a top cause of upload failures.
Verify It Compiles
Open a blank sketch and hit Verify. If it compiles for your ESP, the toolchain installed correctly and you are ready to upload.
void setup() {}
void loop() {}Quick Check
Where do you paste the ESP package link so the IDE can find the board?
Recap
You added the ESP Board Manager URL in Preferences, installed the package, and selected your exact chip. The IDE now speaks ESP. 🎉
Perguntas Frequentes
A aula “Adicione placas ESP à IDE” é grátis?
Sim — o texto completo de “Adicione placas ESP à IDE” é grátis para ler aqui na web. Para praticá-la interativamente (um editor de código integrado e um tutor de IA 24/7) e desbloquear o restante do curso de Arduino & IoT Academy, atualize para CoddyKit PRO. O curso de Arduino & IoT Academy inclui 4 aulas no total.
O que vou aprender em “Adicione placas ESP à IDE”?
Instale o pacote da placa e selecione o chip. Você pratica Arduino & IoT Academy com código prático que executa diretamente no navegador, e um tutor de IA 24/7 responde suas dúvidas enquanto trabalha na aula.
Preciso ter experiência prévia para começar Arduino & IoT Academy?
Nenhuma experiência prévia é necessária. Arduino & IoT Academy no CoddyKit é estruturado para alunos iniciantes até avançados, então você pode começar aqui ou desde o início e aprender no seu ritmo. Esta é a aula 2 de 4.
Quanto tempo leva a aula “Adicione placas ESP à IDE”?
A maioria das aulas CoddyKit leva cerca de 5–10 minutos. Cada uma é compacta e interativa, então você faz progresso constante e retoma exatamente de onde parou entre web e app.
Posso escrever e executar código nesta aula de Arduino & IoT Academy?
Sim. Cada aula de Arduino & IoT Academy inclui um editor de código integrado, então você escreve e executa código real direto no navegador e recebe feedback de IA instantaneamente — nenhuma configuração local necessária.
Todas as aulas deste curso
- Por que ESP32 e ESP8266 para IoT
- Adicione placas ESP à IDE
- Conecte-se ao WiFi no modo estação
- Execute uma página de configuração do ponto de acesso