Otwórz lokalny dashboard
Uruchom openclaw dashboard i odwiedź http://127.0.0.1:18789/, aby potwierdzić, że instalacja działa lokalnie.
Otwórz lokalny dashboard to bezpłatna lekcja OpenClaw Academy na CoddyKit. To lekcja 4 z 4. Możesz przeczytać całą lekcję poniżej za darmo — a potem ćwiczyć ją interaktywnie w przeglądarce z wbudowanym edytorem kodu i tutorem AI dostępnym 24/7. To część ścieżki edukacyjnej OpenClaw Academy, a Twój postęp synchronizuje się między webem a aplikacją CoddyKit. Kurs OpenClaw Academy zawiera 4 lekcji w sumie.
Części tej lekcji nie zostały jeszcze przetłumaczone i są wyświetlane po angielsku.
The Final Check
Onboarding is done, so let us confirm it. The dashboard is a local web page that shows your assistant is up and running on your machine.
Start the Dashboard
Open it with this command. The dashboard subcommand serves the page locally and points you to its address.
openclaw dashboardThe Local Address
By default the dashboard lives at http://127.0.0.1:18789/. Open that URL in your browser to see it.
http://127.0.0.1:18789/Why 127.0.0.1
The address 127.0.0.1 is localhost, meaning your own computer. The dashboard is served right where OpenClaw runs, not on the public internet.
Local by Design
Serving on localhost matches OpenClaw's local-first promise. Nothing about your dashboard is exposed to the outside world by default.
What the Port Means
The number 18789 is the port the dashboard listens on. Together with 127.0.0.1 it tells your browser exactly where to find the page.
Confirm It Is Running
If the page loads, your install is healthy. A working dashboard is your proof that the Gateway started and OpenClaw is alive locally. 🎉
A Window Into the Gateway
The dashboard is your visual view onto the Gateway, where you can keep an eye on your assistant and its connections from the browser.
If the Page Will Not Load
If nothing appears, the daemon may not be running. Re-checking your onboarding step usually brings the Gateway back so the dashboard can load.
Keep It Handy
Bookmark the local URL. Returning to the dashboard later lets you monitor sessions and channels any time the Gateway is up.
Setup Complete
Prereqs, install, onboarding, and dashboard are all checked. Your setup is complete and OpenClaw is ready for its first real chat.
Quick Check
Where does the OpenClaw dashboard live by default?
Recap
You ran openclaw dashboard and opened http://127.0.0.1:18789/ to confirm OpenClaw runs locally. Your full setup is finished and ready to use. ✅
Często zadawane pytania
Czy lekcja „Otwórz lokalny dashboard” jest bezpłatna?
Tak — pełny tekst „Otwórz lokalny dashboard” jest dostępny za darmo tutaj w sieci. Aby ćwiczyć ją interaktywnie (wbudowany edytor kodu i tutor AI dostępny 24/7) i odblokować resztę kursu OpenClaw Academy, przejdź na CoddyKit PRO. Kurs OpenClaw Academy zawiera 4 lekcji w sumie.
Co nauczysz się w „Otwórz lokalny dashboard”?
Uruchom openclaw dashboard i odwiedź http://127.0.0.1:18789/, aby potwierdzić, że instalacja działa lokalnie. Ćwiczysz OpenClaw Academy z praktycznym kodem, który uruchamiasz bezpośrednio w przeglądarce, a tutor AI dostępny 24/7 odpowiada na Twoje pytania podczas pracy nad lekcją.
Czy potrzebuję doświadczenia, aby zacząć OpenClaw Academy?
Nie wymagamy żadnego doświadczenia. OpenClaw Academy w CoddyKit jest strukturyzowany dla początkujących i zaawansowanych użytkowników, więc możesz zacząć tutaj lub od początku i uczyć się w swoim tempie. To lekcja 4 z 4.
Ile czasu zajmuje lekcja „Otwórz lokalny dashboard”?
Większość lekcji CoddyKit trwa około 5–10 minut. Każda lekcja to mały, interaktywny krok, dzięki czemu robisz systematyczne postępy i zawsze wracasz dokładnie do tego samego miejsca — na webie i w aplikacji.
Czy mogę pisać i uruchamiać kod w tej lekcji OpenClaw Academy?
Tak. Każda lekcja OpenClaw Academy zawiera wbudowany edytor kodu, więc piszesz i uruchamiasz prawdziwy kod bezpośrednio w przeglądarce i od razu otrzymujesz sprzężenie zwrotne od AI — bez konfiguracji na komputerze.
Wszystkie lekcje w tym kursie
- Sprawdź wymagania wstępne
- Zainstaluj CLI OpenClaw
- Uruchom kreatora konfiguracji
- Otwórz lokalny dashboard