테스트 실행과 필터링
zig test를 사용해 실행 범위를 좁힙니다.
테스트 실행과 필터링은(는) CoddyKit의 무료 Zig Academy 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Zig Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Zig Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
One Command to Test
To run the tests in a file you call the compiler in test mode. The zig test command compiles and executes every test block it finds.
zig test src/main.zigPoint It at a File
You give zig test the root source file. It pulls in tests from that file and from any file reached through @import.
Reading the Summary
After a run, Zig prints how many tests passed. A line like "All 7 tests passed" means every test block returned without an error.
When a Test Fails
On failure Zig prints the test's name, the assertion that broke, and a stack trace. The name you chose is what makes this easy to read.
Filter by Name
Run just the tests you care about with --test-filter. Only tests whose name contains the given text are executed.
zig test src/main.zig --test-filter parseWhy Filtering Helps
While fixing one feature you rerun only its tests, so feedback is fast. The --test-filter flag matches a substring of the test name.
Skip a Test on Purpose
Return the special error.SkipZigTest from a test to mark it skipped instead of failed, which is handy for not-yet-ready cases.
if (slow) return error.SkipZigTest;Skipped Counts Separately
The summary tallies skipped tests apart from passed and failed, so a skip never hides a real problem in your suite.
Test from the Build
In a real project you usually run tests through the build system instead. A configured zig build test step compiles and runs them.
zig build testTests Need No main
A file with only test blocks and no main function still works with zig test. The test runner supplies the entry point for you.
Make Testing a Habit
Because running tests is a single command, you can do it after every change. Fast feedback is what keeps a Zig codebase trustworthy.
Quick Check
You only want to run tests whose names mention the word parse. Which command does that?
Recap
You ran tests with zig test, read the summary, filtered by name, skipped with error.SkipZigTest, and learned about zig build test. ✅
자주 묻는 질문
“테스트 실행과 필터링” 강의는 무료인가요?
네 — “테스트 실행과 필터링” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Zig Academy 강의 전체를 잠금 해제할 수 있습니다. Zig Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“테스트 실행과 필터링”에서 뭘 배우나요?
zig test를 사용해 실행 범위를 좁힙니다. 브라우저에서 직접 실행하는 실습 코드로 Zig Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Zig Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Zig Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“테스트 실행과 필터링” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Zig Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Zig Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.