슬라이스 순회와 변경
슬라이스를 통해 값을 읽고 씁니다.
슬라이스 순회와 변경은(는) CoddyKit의 무료 Zig Academy 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Zig Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Zig Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Walking a Slice
Once you hold a slice, you usually want to visit every element. Zig's for loop iterates a slice cleanly from start to end. 🔁
The for Over Items
Put the slice in parentheses and name each element with a capture in pipes. The loop hands you one value per pass.
for (items) |value| {
// use value
}Read-Only by Default
A plain capture gives you a copy of each element. Changing that copy does not touch the slice's underlying data.
Capture by Pointer to Mutate
Add * before the capture name to get a pointer instead of a copy. Now writing through it edits the real element.
for (items) |*value| {
value.* += 1;
}Dereference to Write
With a pointer capture you use .* to reach the value it points at. That syntax lets you both read and assign.
value.* = 0;The Slice Must Be Mutable
To change elements the slice type must be plain []T, not []const T. A const slice forbids writing through it.
Looping with an Index
Pair the slice with a range to also get a counter. The second capture after the comma is the current index.
for (items, 0..) |value, i| {
// i is the index
}Indexing Directly
You can also write to a slot by index without a loop capture. Assign through the brackets just like an array.
items[0] = 42;Iterating Two Slices Together
Pass several slices to one for loop to walk them in lockstep. They must share the same length or it panics.
for (xs, ys) |x, y| {
// x and y line up
}Accumulating a Result
Keep a running total in a var declared before the loop, then update it on each pass to compute a sum.
var total: i32 = 0;
for (items) |v| total += v;Skipping with continue
Inside the loop, continue jumps straight to the next element. Use it to ignore values that fail a quick test.
for (items) |v| {
if (v < 0) continue;
}Quick Check
You want to double every element of a []i32 slice in place. Which capture form lets you write back?
Recap
Loop a slice with for: plain captures read copies, |*value| with .* mutates in place, and add a range to track the index. 🎯
자주 묻는 질문
“슬라이스 순회와 변경” 강의는 무료인가요?
네 — “슬라이스 순회와 변경” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Zig Academy 강의 전체를 잠금 해제할 수 있습니다. Zig Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“슬라이스 순회와 변경”에서 뭘 배우나요?
슬라이스를 통해 값을 읽고 씁니다. 브라우저에서 직접 실행하는 실습 코드로 Zig Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Zig Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Zig Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“슬라이스 순회와 변경” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Zig Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Zig Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.