레이아웃 프로토콜
sizeThatFits과 placeSubviews를 구현합니다.
레이아웃 프로토콜은(는) CoddyKit의 무료 SwiftUI Academy 강의입니다. 이것은 4개 중 3번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 SwiftUI Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Beyond Stacks
When stacks and grids are not enough, the Layout protocol lets you write your own container that positions children exactly how you want. 🧩
Two Required Methods
Conform to Layout by implementing sizeThatFits and placeSubviews, the two steps every custom layout needs.
struct MyLayout: Layout {
func sizeThatFits(...) -> CGSize { ... }
func placeSubviews(...) { ... }
}Sizing Yourself
In sizeThatFits, you measure the children and return the total size your container wants to occupy.
func sizeThatFits(proposal: ProposedViewSize,
subviews: Subviews,
cache: inout ()) -> CGSize {
CGSize(width: 200, height: 100)
}The Proposal
The ProposedViewSize is the space the parent offers. You decide how to use or shrink within it.
let width = proposal.width ?? 0The Subviews Proxy
The subviews argument is a collection of proxies. Ask each one for its preferred size before placing it.
for view in subviews {
let size = view.sizeThatFits(.unspecified)
}Placing Children
In placeSubviews, you loop and call place on each subview with an exact point and an anchor.
func placeSubviews(in bounds: CGRect,
proposal: ProposedViewSize,
subviews: Subviews,
cache: inout ()) {
}The place Call
Each place call sets the origin, the anchor point, and the size proposal for that one child.
view.place(at: point,
anchor: .topLeading,
proposal: .unspecified)Walk a Cursor
A simple layout keeps an x cursor, placing each child then advancing by its width plus spacing.
var x = bounds.minX
for view in subviews {
let s = view.sizeThatFits(.unspecified)
view.place(at: CGPoint(x: x, y: bounds.minY),
proposal: .unspecified)
x += s.width
}Using Your Layout
A Layout type is used just like a stack: wrap your views in it and they get arranged by your code.
MyLayout {
Text("One")
Text("Two")
}Optional Cache
The cache parameter lets you store expensive measurements between passes; use Void when you do not need it.
It Is Value-Based
Because a Layout is a struct, SwiftUI can re-run it cheaply, keeping custom containers fast and predictable. ⚡
Quick Check
Recall the two methods every Layout must implement.
Recap
You can now build a custom container with the Layout protocol by measuring in sizeThatFits and positioning in placeSubviews. 🎉
자주 묻는 질문
“레이아웃 프로토콜” 강의는 무료인가요?
네 — “레이아웃 프로토콜” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 SwiftUI Academy 강의 전체를 잠금 해제할 수 있습니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“레이아웃 프로토콜”에서 뭘 배우나요?
sizeThatFits과 placeSubviews를 구현합니다. 브라우저에서 직접 실행하는 실습 코드로 SwiftUI Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
SwiftUI Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 SwiftUI Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 3번째 강의입니다.
“레이아웃 프로토콜” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 SwiftUI Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 SwiftUI Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.