비동기 코드 테스트하기
async/await 흐름이 안정적으로 동작하는지 확인합니다.
비동기 코드 테스트하기은(는) CoddyKit의 무료 SwiftUI Academy 강의입니다. 이것은 4개 중 2번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 SwiftUI Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Async Needs Special Care
Network calls and tasks finish later, not instantly. Your tests must wait for the result before asserting, or they check too early. ⏳
Mark the Test async
The simplest fix is an async test method. Swift lets you await directly, and the runner pauses until the work completes.
func testLoad() async {
}Await Your Method
Inside an async test you can use await just like real code. The line pauses until your ViewModel finishes loading.
await vm.load()Assert After Awaiting
Once the await returns, the data is ready. Now your assertion checks the final state, not an empty one. ✅
XCTAssertEqual(vm.items.count, 3)Throwing Async Tests
If the code can throw, mark the test throws too. Then try await lets errors bubble up and fail the test cleanly.
func testFetch() async throws {
try await vm.fetch()
}Avoid Real Networks
Hitting a live server makes tests slow and flaky. Inject a mock service that returns fixed data instead.
A Mock Service
A mock conforms to the same protocol but returns canned values. Your ViewModel cannot tell the difference, so the logic is tested honestly.
struct MockAPI: API {
func load() async -> [Item] { sample }
}Testing the Error Path
Make your mock throw on demand. Then you can verify the ViewModel sets an error state instead of crashing.
Expectations for Callbacks
For older callback APIs, use an XCTestExpectation. Fulfill it inside the callback, then wait so the test does not end early.
let exp = expectation(description: "done")Wait With a Timeout
Pair every expectation with a timeout. If the callback never fires, the test fails fast instead of hanging forever.
await fulfillment(of: [exp], timeout: 2)Prefer async Over Callbacks
When you can, write code with async/await. Tests stay short, linear, and far easier to read than nested callbacks.
Quick Check
How should you wait for async work in a modern XCTest?
Recap
You can now test async code: mark tests async, await results, mock the network, and use expectations for callbacks. Reliable every run. 🎉
자주 묻는 질문
“비동기 코드 테스트하기” 강의는 무료인가요?
네 — “비동기 코드 테스트하기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 SwiftUI Academy 강의 전체를 잠금 해제할 수 있습니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“비동기 코드 테스트하기”에서 뭘 배우나요?
async/await 흐름이 안정적으로 동작하는지 확인합니다. 브라우저에서 직접 실행하는 실습 코드로 SwiftUI Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
SwiftUI Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 SwiftUI Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 2번째 강의입니다.
“비동기 코드 테스트하기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 SwiftUI Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 SwiftUI Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.