게시자와 구독자
Combine의 핵심 흐름을 이해합니다.
게시자와 구독자은(는) CoddyKit의 무료 SwiftUI Academy 강의입니다. 이것은 4개 중 1번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 SwiftUI Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Meet Combine
Combine is Apple's framework for handling values that arrive over time, like taps, timers, or network responses. 🌊
Values Over Time
Instead of asking for data once, you describe a stream of values and react each time a new one arrives, now or later.
What a Publisher Does
A Publisher is the source. It emits values downstream and tells you when it finishes or fails.
let publisher = [1, 2, 3].publisherOutput and Failure
Every publisher declares two types: its Output (the values it sends) and its Failure (the error it may throw).
Just(42) // Output: Int, Failure: NeverWhat a Subscriber Does
A Subscriber attaches to a publisher, receives each value as it arrives, and decides what to do with it.
Connecting with sink
The sink subscriber is the simplest one: you hand it a closure that runs for every value received.
publisher.sink { value in
print(value)
}Handling Completion
A fuller sink takes two closures: one for completion (finished or failure) and one for each value.
publisher.sink(
receiveCompletion: { print($0) },
receiveValue: { print($0) }
)Storing the Subscription
Subscribing returns a cancellable. Keep it alive, or the stream is torn down immediately.
var bag = Set<AnyCancellable>()
publisher.sink { _ in }
.store(in: &bag)Just and Empty
Just emits one value then finishes. Empty finishes with no values at all. Both are handy building blocks.
let one = Just("hello")Subjects Push Values
A PassthroughSubject lets you send values manually, perfect for forwarding events you control.
let subject = PassthroughSubject<Int, Never>()
subject.send(5)The Pull and Push Flow
The subscriber signals demand, the publisher pushes values, and completion ends the relationship cleanly.
Quick Check
You attached a closure to a publisher and nothing printed. What likely went wrong?
Recap: The Combine Trio
You met the three players: a publisher emits values, a subscriber receives them, and a stored cancellable keeps the link alive. 🎉
자주 묻는 질문
“게시자와 구독자” 강의는 무료인가요?
네 — “게시자와 구독자” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 SwiftUI Academy 강의 전체를 잠금 해제할 수 있습니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“게시자와 구독자”에서 뭘 배우나요?
Combine의 핵심 흐름을 이해합니다. 브라우저에서 직접 실행하는 실습 코드로 SwiftUI Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
SwiftUI Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 SwiftUI Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 1번째 강의입니다.
“게시자와 구독자” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 SwiftUI Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 SwiftUI Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.