디텐트와 드래그 표시기
프레젠테이션 디텐트로 시트 크기를 조절합니다.
디텐트와 드래그 표시기은(는) CoddyKit의 무료 SwiftUI Academy 강의입니다. 이것은 4개 중 2번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 SwiftUI Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
What Are Detents?
A detent is a stopping height a sheet can rest at, like half-open or full. They let users resize the sheet by dragging it. 📏
The presentationDetents Modifier
Add presentationDetents inside the sheet content to list the heights it can snap to. Pass a set of detents to enable resizing.
.presentationDetents([.medium, .large])Medium and Large
The two built-in detents are .medium, about half the screen, and .large, nearly full height. Offer both so users pick what fits.
.presentationDetents([.medium, .large])A Fixed Height Detent
Use .height to pin a sheet to an exact point size. This is great for short forms that should not grow taller than needed.
.presentationDetents([.height(220)])A Fraction Detent
The .fraction detent sizes the sheet to a share of the screen, like a third. It adapts nicely across different device sizes.
.presentationDetents([.fraction(0.33)])The Drag Indicator
The little grabber bar at the top is the drag indicator. It hints that the sheet can be pulled up, down, or dismissed.
Showing the Grabber
Add presentationDragIndicator set to .visible to always show the grabber, even when only one detent is available.
.presentationDragIndicator(.visible)Combining Modifiers
Detents and the drag indicator stack together on the sheet content. Apply both for a resizable sheet with a clear grab handle. ✨
ContentView()
.presentationDetents([.medium, .large])
.presentationDragIndicator(.visible)Tracking the Selected Detent
Bind presentationDetents to a state value to know which height the user chose, so your layout can react to the current size.
.presentationDetents([.medium, .large], selection: $detent)Why Detents Matter
Detents keep sheets non-blocking. A medium sheet lets users glance at content while still seeing the screen behind it.
One Detent, No Resize
If you pass a single detent, the sheet stays one fixed height and cannot be resized, though it can still be swiped to dismiss.
.presentationDetents([.medium])Quick Check
Which modifier lets a sheet snap to multiple heights?
Recap: Detents
You can now resize sheets with detents like .medium, .large, and .fraction, plus show a grabber with the drag indicator. Great progress! 🎉
자주 묻는 질문
“디텐트와 드래그 표시기” 강의는 무료인가요?
네 — “디텐트와 드래그 표시기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 SwiftUI Academy 강의 전체를 잠금 해제할 수 있습니다. SwiftUI Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“디텐트와 드래그 표시기”에서 뭘 배우나요?
프레젠테이션 디텐트로 시트 크기를 조절합니다. 브라우저에서 직접 실행하는 실습 코드로 SwiftUI Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
SwiftUI Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 SwiftUI Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 2번째 강의입니다.
“디텐트와 드래그 표시기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 SwiftUI Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 SwiftUI Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.