대시보드 둘러보기
http://127.0.0.1:18789/의 대시보드에서 어시스턴트와 연결 상태를 모니터링하는 방법을 익힙니다
대시보드 둘러보기은(는) CoddyKit의 무료 OpenClaw Academy 강의입니다. 이것은 4개 중 3번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 OpenClaw Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
What the Dashboard Is
The dashboard is OpenClaw's local web page where you watch your assistant and its connections at a glance. 📊
Starting It Up
You open it with one command. Run it and OpenClaw launches the dashboard for you.
openclaw dashboardIts Local Address
The dashboard lives at a local address on your own machine. Open it in your browser to take a look.
http://127.0.0.1:18789/Why 127.0.0.1
The address 127.0.0.1 means your own computer. The dashboard stays local, matching the your-hardware-your-rules idea.
Confirm Your Install
Opening the dashboard is the easy way to confirm your install is up and running locally.
See the Gateway
From the dashboard you can see the Gateway, the daemon that coordinates your sessions, routing, and channels.
Monitor Connections
The dashboard lets you monitor your assistant and its connections, so you can tell which channels are bridged in.
A Window on Your Setup
Think of the dashboard as a friendly window onto your setup, instead of squinting at raw logs in a terminal.
It Runs Locally
Because it is served from 127.0.0.1, the dashboard never leaves your machine. Your view of OpenClaw stays private.
Reaching It Remotely
Want to view it from elsewhere? You reach your local Gateway over SSH or Tailscale rather than exposing it openly.
Your Control Panel
In short, the dashboard is your control panel: one local page to check that OpenClaw is healthy and connected.
Quick Check
Let us confirm where the dashboard lives.
Recap
Run openclaw dashboard and visit 127.0.0.1:18789 to monitor your Gateway and connections, all served locally. 🎉
자주 묻는 질문
“대시보드 둘러보기” 강의는 무료인가요?
네 — “대시보드 둘러보기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 OpenClaw Academy 강의 전체를 잠금 해제할 수 있습니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“대시보드 둘러보기”에서 뭘 배우나요?
http://127.0.0.1:18789/의 대시보드에서 어시스턴트와 연결 상태를 모니터링하는 방법을 익힙니다 브라우저에서 직접 실행하는 실습 코드로 OpenClaw Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
OpenClaw Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 OpenClaw Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 3번째 강의입니다.
“대시보드 둘러보기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 OpenClaw Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 OpenClaw Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.