온보딩 마법사 실행하기
openclaw onboard --install-daemon을 실행해 안내에 따라 설정 및 페어링 과정을 진행하고 영구 데몬을 등록합니다
온보딩 마법사 실행하기은(는) CoddyKit의 무료 OpenClaw Academy 강의입니다. 이것은 4개 중 3번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 OpenClaw Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Meet the Wizard
Installing gave you the command; now the onboarding wizard sets everything up. It is a guided flow that walks you through the first-time configuration.
The Onboard Command
Start the wizard with this command. The onboard subcommand launches the guided setup right inside your terminal.
openclaw onboard --install-daemonWhat --install-daemon Does
The --install-daemon flag registers the Gateway as a persistent background service, so OpenClaw can keep running after you close the terminal.
Why a Daemon
A daemon is a long-lived background process. Installing it during onboarding means your assistant stays available without you re-launching it each time.
It Is Guided
You do not edit files by hand here. The wizard asks questions in a guided sequence and applies your answers for you, step by step.
Pairing Flows
Onboarding includes pairing flows that help you connect a chat channel, so your phone or app can talk to the Gateway when setup finishes.
Your API Key Comes In Here
This is where the API key you prepared earlier gets connected. The wizard wires your chosen LLM provider into OpenClaw during setup.
Follow the Prompts
Just read each step and answer. Following the prompts in order is all it takes; the wizard handles the wiring behind the scenes.
The Gateway Goes Live
By the end, the Gateway is installed and running as the core daemon. It becomes the single hub that manages your sessions and channels.
Run It Once
Onboarding is mostly a one-time step. Once the daemon is registered and a channel is paired, you normally do not repeat the full wizard.
What Comes Next
After the wizard finishes, the natural next move is to open the dashboard and confirm everything is running locally. That is the final check.
Quick Check
What does the --install-daemon flag set up?
Recap
You ran openclaw onboard --install-daemon, followed the guided prompts, connected your key, and brought the Gateway daemon online. Time to open the dashboard. 🚀
자주 묻는 질문
“온보딩 마법사 실행하기” 강의는 무료인가요?
네 — “온보딩 마법사 실행하기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 OpenClaw Academy 강의 전체를 잠금 해제할 수 있습니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“온보딩 마법사 실행하기”에서 뭘 배우나요?
openclaw onboard --install-daemon을 실행해 안내에 따라 설정 및 페어링 과정을 진행하고 영구 데몬을 등록합니다 브라우저에서 직접 실행하는 실습 코드로 OpenClaw Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
OpenClaw Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 OpenClaw Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 3번째 강의입니다.
“온보딩 마법사 실행하기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 OpenClaw Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 OpenClaw Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- 필수 조건 확인하기
- OpenClaw CLI 설치하기
- 온보딩 마법사 실행하기
- 로컬 대시보드 열기