SSH와 Tailscale을 통한 원격 접근
/gateway/remote에 설명된 대로 SSH 또는 Tailscale을 사용하여 어디서든 Gateway에 접근합니다.
SSH와 Tailscale을 통한 원격 접근은(는) CoddyKit의 무료 OpenClaw Academy 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 OpenClaw Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Reach It From Anywhere
Your Gateway runs locally, but you do not have to be home to use it. Remote access lets you reach it from anywhere. 🌍
Still Self-Hosted
Remote access does not move your assistant to the cloud. It stays self-hosted on your hardware; you just open a safe path to it.
Two Recommended Paths
OpenClaw documents two ways to connect remotely: SSH and Tailscale. Both keep the link private instead of exposing it openly.
What SSH Gives You
SSH gives you an encrypted shell into the machine running your Gateway, so you can manage it securely from a remote computer.
A Familiar Tool
SSH is a standard, well-tested tool many developers already use, which makes it a dependable choice for reaching your Gateway.
ssh user@your-gateway-hostWhat Tailscale Gives You
Tailscale builds a private network between your devices, so your Gateway feels local even when you are far away.
Private Network Feel
With Tailscale, devices connect as if on the same LAN. You skip exposing ports to the public internet entirely.
Avoid Public Exposure
Both options matter because you should not put a Gateway with full system access on the open internet. Keep the path private.
Pair With Guardrails
Remote access does not replace your other controls. Keep allowlists and required mentions in place even on a private link.
Mobile Nodes Too
You can also pair iOS and Android nodes with the Gateway, unlocking Canvas, camera, and voice workflows from your phone.
Find The Guide
The full setup for remote access lives in the /gateway/remote docs. Follow them to connect SSH or Tailscale correctly. 📡
Quick Check
Let us confirm the safe ways to reach your Gateway remotely.
Recap
Reach your self-hosted Gateway remotely with SSH or Tailscale, keep guardrails on, and follow the /gateway/remote docs. ✅
AI 튜터와 함께 Bash을(를) 배우세요 — 무료
브라우저에서 실제 코드를 작성하고 실행하며, 24/7 AI 튜터로부터 즉각적인 도움을 받고, 웹이나 앱에서 중단한 부분부터 계속 학습하세요.
- 코스
- 10
- 레슨
- 40
자주 묻는 질문
“SSH와 Tailscale을 통한 원격 접근” 강의는 무료인가요?
네 — “SSH와 Tailscale을 통한 원격 접근” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 OpenClaw Academy 강의 전체를 잠금 해제할 수 있습니다. OpenClaw Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“SSH와 Tailscale을 통한 원격 접근”에서 뭘 배우나요?
/gateway/remote에 설명된 대로 SSH 또는 Tailscale을 사용하여 어디서든 Gateway에 접근합니다. 브라우저에서 직접 실행하는 실습 코드로 OpenClaw Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
OpenClaw Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 OpenClaw Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“SSH와 Tailscale을 통한 원격 접근” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 OpenClaw Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 OpenClaw Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- 안전장치가 중요한 이유
- 토큰, 허용 목록, requireMention
- Gateway 보안 문서
- SSH와 Tailscale을 통한 원격 접근