기존 레코드 안전하게 수정하기
필드를 변경하고 변경 사항을 올바르게 플러시합니다.
기존 레코드 안전하게 수정하기은(는) CoddyKit의 무료 Flask Academy 강의입니다. 이것은 4개 중 3번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Flask Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Flask Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
The U in CRUD
Updating means changing an existing row, not making a new one. The trick is to load the record first, then edit it. ✏️
Find Before You Change
Always fetch the target row by its id before touching it. get_or_404() loads it or stops with a clean 404.
user = User.query.get_or_404(user_id)Edit Like a Python Object
Once loaded, just reassign its attributes. SQLAlchemy notices the change and marks the object as dirty for you.
user.name = "New Name"Read the New Values
Updates usually carry the new data in the request body. Parse it with get_json() before applying anything.
data = request.get_json()Apply Fields Carefully
Only overwrite fields the client actually sent. Using get() with a fallback avoids wiping values to None by accident.
user.name = data.get("name", user.name)Commit the Change
No add() is needed for an existing row. A single commit() flushes your edits to the database.
db.session.commit()PUT Replaces, PATCH Tweaks
Use PUT when the client sends the whole object and PATCH when it sends only the fields it wants to change.
@app.route("/users/<int:id>", methods=["PATCH"])Validate Before Saving
Check incoming values before you commit. Reject bad data with a 400 so you never persist a broken record.
if not data.get("name"):
return jsonify(error="name required"), 400Roll Back if It Breaks
If the commit raises, call rollback() to discard the half-applied edit and leave the row exactly as it was.
except Exception:
db.session.rollback()Return the Updated Row
A good update reply sends back the fresh record with status 200, so the client sees the saved result.
return jsonify({"id": user.id, "name": user.name}), 200Load, Edit, Commit
The whole update flow is three beats: load the row, change its attributes, then commit. No new object ever appears.
Quick Check
You changed a loaded object's attribute. What must happen for the edit to stick?
Recap: Updating Records
You load with get_or_404, apply only sent fields, validate, then commit, rolling back on errors. Safe updates unlocked! 🎉
자주 묻는 질문
“기존 레코드 안전하게 수정하기” 강의는 무료인가요?
네 — “기존 레코드 안전하게 수정하기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Flask Academy 강의 전체를 잠금 해제할 수 있습니다. Flask Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“기존 레코드 안전하게 수정하기”에서 뭘 배우나요?
필드를 변경하고 변경 사항을 올바르게 플러시합니다. 브라우저에서 직접 실행하는 실습 코드로 Flask Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Flask Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Flask Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 3번째 강의입니다.
“기존 레코드 안전하게 수정하기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Flask Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Flask Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- 레코드 만들고 세션 커밋하기
- 단일 조회와 다중 조회 엔드포인트
- 기존 레코드 안전하게 수정하기
- 삭제하고 없는 행 처리하기