0Pricing
Flask Academy · 강의

디버그 모드로 개발 서버 실행하기

flask run을 시작하고 디버그를 활성화한 뒤 리로더를 살펴봅니다.

디버그 모드로 개발 서버 실행하기은(는) CoddyKit의 무료 Flask Academy 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Flask Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Flask Academy 강의에는 총 4개의 강의가 포함되어 있습니다.

이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.

The Dev Server

Flask includes a built-in development server so you can run your app instantly while building, with no extra setup. 🛠️

Start with flask run

The recommended way to launch is the flask run command, which finds your app and serves it on the local port.

flask run

Tell Flask Your App

Set the FLASK_APP variable so the command knows which file holds your application object.

export FLASK_APP=app.py

The Default Address

By default the server listens on 127.0.0.1:5000, reachable only from your own machine while you develop.

Turn On Debug Mode

Debug mode unlocks two big helpers: a live reloader and a rich error page. Enable it while developing only.

flask run --debug

The Auto Reloader

With debug on, the reloader watches your files and restarts the server whenever you save a change. No manual restarts. ♻️

The Interactive Debugger

When code crashes, debug mode shows a detailed traceback in the browser so you can pinpoint the failing line fast.

Set Debug in Code

You can also flip debug on inside app.run, handy when you launch the file directly with python.

app.run(debug=True)

Reading the Reloader Output

The console prints a line each time it reloads, confirming your edits were picked up and the server is fresh.

Never Debug in Production

The debugger can run arbitrary code, so it is a serious security risk. Keep debug mode off on any public server.

Stop the Server

Press Ctrl+C in the terminal to shut the dev server down cleanly when you are finished working.

Quick Check

Quick check on what debug mode gives you.

Recap

You ran the dev server with flask run, enabled debug for the reloader and debugger, and learned to keep it off in production. 🔒

자주 묻는 질문

“디버그 모드로 개발 서버 실행하기” 강의는 무료인가요?

네 — “디버그 모드로 개발 서버 실행하기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Flask Academy 강의 전체를 잠금 해제할 수 있습니다. Flask Academy 강의에는 총 4개의 강의가 포함되어 있습니다.

“디버그 모드로 개발 서버 실행하기”에서 뭘 배우나요?

flask run을 시작하고 디버그를 활성화한 뒤 리로더를 살펴봅니다. 브라우저에서 직접 실행하는 실습 코드로 Flask Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.

Flask Academy을(를) 시작하는 데 경험이 필요한가요?

사전 경험은 필요하지 않습니다. CoddyKit의 Flask Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.

“디버그 모드로 개발 서버 실행하기” 강의는 얼마나 걸리나요?

대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.

이 Flask Academy 강의에서 코드를 작성하고 실행할 수 있나요?

네. 모든 Flask Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.

이 강의의 모든 강의

  1. Flask란 무엇이며 왜 존재하는가
  2. Virtualenv 설정하고 Flask 설치하기
  3. Hello World: 첫 Flask 앱
  4. 디버그 모드로 개발 서버 실행하기
← Flask Academy(으)로 돌아가기