검증을 포함한 에포크 반복 과정
데이터를 한 바퀴 처리할 때마다 평가합니다
검증을 포함한 에포크 반복 과정은(는) CoddyKit의 무료 Deep Learning Academy 강의입니다. 이것은 4개 중 2번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Deep Learning Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Deep Learning Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
What an Epoch Means
One epoch is a single full pass over your entire training set. Real training repeats this pass many times so the model keeps improving.
The Outer Loop
Wrap your whole routine in a loop over epochs. Each turn of this outer loop trains once and then checks progress on validation.
for epoch in range(num_epochs):
train_one_epoch()
validate()The Inner Training Loop
Inside an epoch you loop over batches from the DataLoader. Each batch runs the familiar forward, loss, backward, step rhythm.
for x, y in train_loader:
optimizer.zero_grad()
loss = loss_fn(model(x), y)
loss.backward()
optimizer.step()Switch to Train Mode
Before training a pass, call model.train(). It turns on layers like dropout and batch norm that should behave differently while learning.
model.train()Switch to Eval Mode
Before validating, call model.eval(). This freezes dropout and uses running batch-norm stats so your scores are steady and fair.
model.eval()No Gradients While Validating
Validation only reads the model, so wrap it in torch.no_grad(). Skipping the graph saves memory and runs noticeably faster.
with torch.no_grad():
for x, y in val_loader:
out = model(x)Track the Running Loss
Add up each batch's loss across the epoch, then divide by the count. This average loss is one clean number to compare epoch to epoch.
total += loss.item() * x.size(0)
epoch_loss = total / len(loader.dataset)Measure Validation Loss
Compute the same average on the validation set. This validation loss reveals how well the model generalizes beyond what it trained on.
Print Progress Each Epoch
Log both losses every epoch so you can watch the curves. Seeing the trend live makes overfitting easy to catch the moment it starts.
print(epoch, train_loss, val_loss)Read the Two Curves
Healthy training shows both losses falling. When validation loss starts climbing while training keeps dropping, the model is beginning to overfit.
Don't Backward on Validation
A frequent bug is calling backward() during validation. Never update weights from val data, or you contaminate your honest measurement.
Quick Check
What should you call right before running the validation pass?
Recap
Each epoch trains in train mode, then validates in eval mode under no_grad. Track both losses and watch the gap to catch overfitting early. 📈
자주 묻는 질문
“검증을 포함한 에포크 반복 과정” 강의는 무료인가요?
네 — “검증을 포함한 에포크 반복 과정” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Deep Learning Academy 강의 전체를 잠금 해제할 수 있습니다. Deep Learning Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“검증을 포함한 에포크 반복 과정”에서 뭘 배우나요?
데이터를 한 바퀴 처리할 때마다 평가합니다 브라우저에서 직접 실행하는 실습 코드로 Deep Learning Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Deep Learning Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Deep Learning Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 2번째 강의입니다.
“검증을 포함한 에포크 반복 과정” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Deep Learning Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Deep Learning Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- 학습, 검증과 테스트 데이터 나누기
- 검증을 포함한 에포크 반복 과정
- state_dict로 저장하고 불러오기
- 검증 손실을 이용한 조기 종료