온도와 습도 읽기
라이브러리를 호출해 실제 기후 수치를 가져옵니다.
온도와 습도 읽기은(는) CoddyKit의 무료 Arduino & IoT Academy 강의입니다. 이것은 4개 중 3번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Arduino & IoT Academy 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Arduino & IoT Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Time to Read
Your sensor is wired and the library is ready. Now you will ask it for real numbers and print them to the Serial Monitor. 🌡️
Read Temperature
Call readTemperature() to get the current value in Celsius. Store it in a float because the reading often has decimals.
float t = dht.readTemperature();Read Humidity
Call readHumidity() to get the moisture in the air as a percentage. Like temperature, save it in a float variable.
float h = dht.readHumidity();Want Fahrenheit?
Pass true to readTemperature to get Fahrenheit instead of Celsius. One small argument switches the whole unit.
float f = dht.readTemperature(true);Print the Values
Send your readings to the Serial Monitor so you can watch them live. Labels next to numbers make the output easy to read.
Serial.print("Temp: ");
Serial.println(t);Show Both at Once
You can print temperature and humidity together on one line. A short label before each value keeps the data clear.
Serial.print(h);
Serial.println("% humidity");DHT Is Slow
A DHT updates only about once per second. Reading faster than that just returns stale or failed values, so be patient.
Pace Your Loop
Add a short delay() at the end of loop so you read at a sensible pace. Two seconds is a safe, comfortable gap.
delay(2000);Compute Heat Index
The library can also estimate the heat index, how hot it feels, from temperature and humidity together. It is one handy call.
float hi = dht.computeHeatIndex(t, h, false);Use the Readings
Once you have the numbers, you can act on them: turn on a fan above a threshold or log values for later analysis.
Read Once, Reuse
Save each reading into a variable once per loop, then reuse it. Calling the sensor many times in a row only slows you down.
Quick Check
You want the temperature in Fahrenheit. Which call returns it?
Recap
You read temperature and humidity into floats, printed them with labels, paced the loop, and even computed how hot it feels. 🎉
자주 묻는 질문
“온도와 습도 읽기” 강의는 무료인가요?
네 — “온도와 습도 읽기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Arduino & IoT Academy 강의 전체를 잠금 해제할 수 있습니다. Arduino & IoT Academy 강의에는 총 4개의 강의가 포함되어 있습니다.
“온도와 습도 읽기”에서 뭘 배우나요?
라이브러리를 호출해 실제 기후 수치를 가져옵니다. 브라우저에서 직접 실행하는 실습 코드로 Arduino & IoT Academy을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Arduino & IoT Academy을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Arduino & IoT Academy은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 3번째 강의입니다.
“온도와 습도 읽기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Arduino & IoT Academy 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Arduino & IoT Academy 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.