Perché ESP32 ed ESP8266 sono adatti all'IoT
WiFi integrato, maggiore potenza e lo stesso codice Arduino.
Perché ESP32 ed ESP8266 sono adatti all'IoT è una lezione Arduino & IoT Academy gratuita su CoddyKit. Questa è la lezione 1 di 4. Puoi leggere la lezione completa qui gratuitamente — poi esercitati direttamente nel browser con un editor di codice integrato e un tutor IA disponibile 24/7. Fa parte del percorso di apprendimento Arduino & IoT Academy, e i tuoi progressi si sincronizzano tra il web e l'app CoddyKit. Il corso Arduino & IoT Academy include 4 lezioni in totale.
Parti di questa lezione non sono ancora state tradotte e vengono mostrate in inglese.
The Missing Piece
A plain Arduino Uno has no way to reach the internet. For real IoT, you need a board with built-in WiFi, and that is where the ESP family shines. 📡
Meet the ESP8266
The ESP8266 is a tiny, cheap chip with WiFi baked right in. It made low-cost internet projects possible for hobbyists everywhere.
Meet the ESP32
The ESP32 is its bigger sibling: faster, dual-core, and it adds Bluetooth alongside WiFi. It is the go-to board for serious IoT today.
Same Language You Know
Here is the best part: both boards run the same Arduino code style you have already learned. setup() and loop() work exactly as before.
void setup() {
Serial.begin(115200);
}
void loop() {
}More Power Under the Hood
An ESP32 runs at up to 240 MHz with far more memory than an Uno. That headroom lets it juggle WiFi and your sensors at once.
Watch the Voltage
One key difference: ESP pins run on 3.3V, not 5V. Feeding them 5V can fry the chip, so check every sensor's voltage first.
Faster Serial Speed
ESP boards usually open Serial at 115200 baud, not 9600. It keeps up with the chatty WiFi boot messages they print at startup.
Serial.begin(115200);Lots of Pins, Some Special
The ESP32 offers many GPIO pins, but a few are reserved or input-only. You learn which ones are safe as you build.
The WiFi Library
To go online you include the built-in WiFi library. One header line unlocks connecting, scanning, and serving web pages.
#include <WiFi.h>Cheap Enough to Deploy
These boards cost just a few dollars, so you can scatter many around a home or farm. Low price is a huge reason the ESP dominates IoT.
Which One to Pick
Need only WiFi on a tight budget? The ESP8266 is fine. Want Bluetooth, more pins, and speed? Reach for the ESP32.
Quick Check
You want a board for IoT that also speaks Bluetooth. Which fits best?
Recap
You met the WiFi-ready ESP boards, saw they run familiar Arduino code on 3.3V, and learned the ESP32 adds Bluetooth and power. 🎉
Domande Frequenti
La lezione «Perché ESP32 ed ESP8266 sono adatti all'IoT» è gratuita?
Sì — il testo completo di «Perché ESP32 ed ESP8266 sono adatti all'IoT» è gratuito qui sul web. Per esercitarvi in modo interattivo (un editor di codice integrato e un tutor IA 24/7) e sbloccare il resto del corso Arduino & IoT Academy, passa a CoddyKit PRO. Il corso Arduino & IoT Academy include 4 lezioni in totale.
Cosa imparerò in «Perché ESP32 ed ESP8266 sono adatti all'IoT»?
WiFi integrato, maggiore potenza e lo stesso codice Arduino. Eserciti Arduino & IoT Academy con codice pratico che esegui direttamente nel browser, e un tutor IA 24/7 risponde alle tue domande mentre lavori sulla lezione.
Ho bisogno di esperienza per iniziare Arduino & IoT Academy?
Non è richiesta alcuna esperienza precedente. Arduino & IoT Academy su CoddyKit è strutturato per principianti e studenti avanzati, quindi puoi iniziare da qui o dall'inizio e procedere al tuo ritmo. Questa è la lezione 1 di 4.
Quanto tempo richiede la lezione «Perché ESP32 ed ESP8266 sono adatti all'IoT»?
La maggior parte delle lezioni CoddyKit richiede circa 5–10 minuti. Ogni lezione è breve e interattiva, quindi fai progressi costanti e riprendi esattamente da dove hai lasciato su web e app.
Posso scrivere ed eseguire codice in questa lezione Arduino & IoT Academy?
Sì. Ogni lezione Arduino & IoT Academy include un editor di codice integrato, quindi scrivi ed esegui codice reale direttamente nel tuo browser e ricevi feedback istantaneo dall'IA — nessuna configurazione locale necessaria.
Tutte le lezioni di questo corso
- Perché ESP32 ed ESP8266 sono adatti all'IoT
- Aggiungere le schede ESP all'IDE
- Connettersi al WiFi in modalità Station
- Eseguire una pagina di configurazione Access Point