Annuler les erreurs en toute sécurité
Récupérez votre travail perdu avec l’aide de l’IA.
Annuler les erreurs en toute sécurité est une leçon Vibe Coding gratuite sur CoddyKit. Ceci est la leçon 4 sur 4. Tu peux lire la leçon complète ci-dessous gratuitement — puis la pratiquer en direct dans le navigateur avec un éditeur de code intégré et un tuteur IA 24/7. Elle fait partie du parcours d'apprentissage Vibe Coding, et ta progression se synchronise sur le web et l'application CoddyKit. Le cours Vibe Coding comprend 4 leçons au total.
Certaines parties de cette leçon n'ont pas encore été traduites et s'affichent en anglais.
Mistakes Are Normal
Every builder breaks things. The difference between panic and calm is one thing: knowing you can undo it.
Because you've been committing along the way, your good work is saved. This lesson shows you how to recover from the most common "oh no" moments — with AI guiding you so you never make things worse.
Rule #1 of undoing: don't panic, don't randomly type commands. Ask AI first.
The First Question to Ask
Before undoing anything, figure out where your changes are. There are three places work can live:
- Unsaved — edited but not committed yet
- Committed — snapshotted but maybe you want to go back
- Pushed — already on GitHub
The right undo depends on which one. So always start by telling AI your exact situation.
Undo: Unsaved Changes
Most common case: you made changes (often AI made them), they broke things, and you haven't committed yet. You just want to go back to your last good commit.
This is the easiest recovery. Tell AI exactly this:
My last commit was working. Then I made changes that broke everything,
and I have NOT committed those bad changes.
I want to throw away all my uncommitted changes and go back to
exactly how things were at my last commit.
Give me the safe command to do that, and warn me about anything
I'll permanently lose.A Mental Model of Undo
Think of undo as choosing which save point to load. Run this to see the idea: you pick a known-good commit and discard everything after it.
const commits = ['Start', 'Add homepage', 'Add login (WORKS)', 'Break everything'];
let current = commits.length - 1;
console.log('You are here: ' + commits[current]);
const goodPoint = 2; // 'Add login (WORKS)'
current = goodPoint;
console.log('Reverting to: ' + commits[current]);
console.log('Your project is now back to a working state.');Undo: A Bad Commit
What if you already committed the broken change? You have two safe options, and AI will pick the right one:
- revert — creates a NEW commit that undoes the bad one (safe, keeps history)
- reset — moves you back, removing the bad commit (use with care)
For beginners, git revert is the gentle, reversible choice. It never erases history.
Revert vs Reset Prompt
Not sure which to use? Don't guess. Describe it and let AI choose the safest path:
I committed a change that broke my app. The bad commit is my most
recent one. I haven't pushed yet.
I'm a beginner and want the SAFEST way to undo just that one commit
without losing my earlier work. Should I use git revert or git reset?
Explain the difference simply, then give me the exact command.Recovering 'Lost' Work
Panic moment: "I think I deleted hours of work!" Usually, it's not actually gone. Git keeps a hidden safety log called the reflog that records nearly everything you did.
Even commits you thought you erased can often be brought back. Before you despair, ask AI to check the reflog:
I think I lost a bunch of work in Git -- maybe from a reset or a
branch I deleted. It might be gone.
Walk me through using `git reflog` to find my lost commits, and
then how to safely restore the one I need. Go one step at a time
and wait for me to paste the output before the next step.Undo One File Only
Sometimes you don't want to undo everything — just one file you messed up, while keeping your other changes.
Git can restore a single file to how it looked in any past commit. Describe exactly which file:
I have several files with changes I want to KEEP. But one file,
styles.css, got messed up and I want ONLY that file restored to
how it was in my last commit.
Give me the exact command to restore just styles.css, leaving
all my other changes untouched.The Safety Branch Trick
Before any scary undo, do this one thing: make a backup branch. It's a free insurance policy.
If the undo goes wrong, your backup branch still holds everything exactly as it was. Run this to see why it's reassuring:
let mainBranch = 'risky-state';
let backup = null;
// Before undoing, snapshot current state into a backup branch
backup = mainBranch;
console.log('Backup branch saved: ' + backup);
// Now experiment freely on main
mainBranch = 'after-undo';
console.log('Main branch now: ' + mainBranch);
console.log('If undo fails, restore from backup: ' + backup);When It's Already Pushed
If you already pushed the mistake to GitHub, undoing is still possible but needs a little more care so you don't confuse collaborators.
The safest move is almost always git revert (a new undo commit) followed by another push. Avoid rewriting pushed history unless AI tells you it's safe. Let AI handle the nuance:
I already pushed a broken commit to GitHub. Other people might be
using this repo.
What's the SAFEST way to undo it without messing up anyone else's
copy? I'm a beginner. Recommend revert vs reset for this case and
give me the exact commands.Your Calm Recovery Routine
Lock in this routine so mistakes never scare you again:
- Stop — don't randomly type commands
- Identify — unsaved, committed, or pushed?
- Backup — make a safety branch if it's risky
- Ask AI — describe the exact situation, get the safe command
- Verify — confirm the app works after
With commits as your save points and AI as your guide, there's almost no mistake you can't walk back.
Quick Check
You broke something. What's the smartest first move?
Recap & Course Wrap-Up
You can now recover from mistakes calmly:
- Identify where changes live: unsaved, committed, or pushed
- Discard uncommitted changes to return to your last good commit
- Use git revert for a gentle, reversible undo of a commit
- The reflog can rescue "lost" work
- Restore a single file, and make a backup branch before risky undos
That completes Version Control & Git with AI. You now save, organize, and recover your projects with confidence — and an AI helper at every step. Go build fearlessly.
Questions Fréquemment Posées
La leçon « Annuler les erreurs en toute sécurité » est-elle gratuite ?
Oui — le texte complet de « Annuler les erreurs en toute sécurité » est gratuit à lire ici sur le web. Pour la pratiquer de manière interactive (un éditeur de code intégré et un tuteur IA 24/7) et déverrouiller le reste du cours Vibe Coding, passe à CoddyKit PRO. Le cours Vibe Coding comprend 4 leçons au total.
Qu'est-ce que j'apprendrai dans « Annuler les erreurs en toute sécurité » ?
Récupérez votre travail perdu avec l’aide de l’IA. Tu pratiques Vibe Coding avec du code pratique que tu exécutes directement dans le navigateur, et un tuteur IA 24/7 répond à tes questions au fur et à mesure que tu avances dans la leçon.
Dois-je avoir de l'expérience pour commencer Vibe Coding ?
Aucune expérience préalable n'est requise. Vibe Coding sur CoddyKit est structuré pour les débutants jusqu'aux apprenants avancés, donc tu peux commencer ici ou depuis le début et avancer à ton rythme. Ceci est la leçon 4 sur 4.
Combien de temps prend la leçon « Annuler les erreurs en toute sécurité » ?
La plupart des leçons CoddyKit prennent environ 5–10 minutes. Chacune est courte et interactive, tu progresses régulièrement et tu repiques exactement où tu t'es arrêté sur le web et l'app.
Peux-tu écrire et exécuter du code dans cette leçon Vibe Coding ?
Oui. Chaque leçon Vibe Coding inclut un éditeur de code intégré, tu écris et exécutes du vrai code directement dans ton navigateur et tu reçois des retours IA instantanés — aucune configuration locale requise.
Toutes les leçons de ce cours
- Pourquoi le contrôle de version est important
- Notions fondamentales de Git avec l’aide de l’IA
- Laisser l’IA rédiger les messages de validation
- Annuler les erreurs en toute sécurité