0Pricing
React Native Academy · Leçon

useNativeDriver pour des animations à 60 images/s

Activez useNativeDriver: true pour les animations de type timing et spring afin de déporter le travail vers le thread natif, découvrez quelles propriétés sont compatibles et mesurez le gain de performances.

useNativeDriver pour des animations à 60 images/s est une leçon React Native Academy gratuite sur CoddyKit. Ceci est la leçon 4 sur 4. Tu peux lire la leçon complète ci-dessous gratuitement — puis la pratiquer en direct dans le navigateur avec un éditeur de code intégré et un tuteur IA 24/7. Elle fait partie du parcours d'apprentissage React Native Academy, et ta progression se synchronise sur le web et l'application CoddyKit. Le cours React Native Academy comprend 4 leçons au total.

Certaines parties de cette leçon n'ont pas encore été traduites et s'affichent en anglais.

The JavaScript Bridge Problem

React Native traditionally communicates between JavaScript and the native layer through a bridge — an asynchronous message channel. During animations, style updates must cross this bridge on every frame. If the JavaScript thread is busy (processing data, rendering, or garbage collecting), frames are dropped and animations stutter.

On a 60fps display, you have only ~16ms per frame to do all work. Any JavaScript overhead beyond that causes visible jank. For animations that update properties like opacity and transform, there is a better way: the native driver.

What useNativeDriver Does

When you set useNativeDriver: true, React Native serializes the animation configuration (start value, end value, duration, easing) and sends it to the native side once before the animation starts. The native layer then runs the animation entirely without touching JavaScript on each frame.

This means the animation continues smoothly even if JavaScript is blocked — loading data, parsing JSON, or running heavy logic. The result is consistently smooth 60fps animations on both iOS and Android.

Animated.timing(opacity, {
  toValue: 1,
  duration: 500,
  useNativeDriver: true, // offloads to native thread
}).start();
// JavaScript thread can now do other work
// without affecting animation smoothness

Which Properties Support Native Driver

Not all style properties can be animated with the native driver. The native driver supports transform (translateX, translateY, scale, rotate) and opacity — properties that can be applied on the GPU without a layout pass. Properties that affect layout like width, height, top, left, padding, margin, and backgroundColor are NOT supported.

If you try to animate an unsupported property with useNativeDriver: true, React Native will log a warning and silently fall back to the JS driver. Always check the property list when migrating animations.

// SUPPORTED with useNativeDriver: true
Animated.timing(opacity, { toValue: 1, useNativeDriver: true, duration: 300 })
Animated.timing(translateX, { toValue: 100, useNativeDriver: true, duration: 300 })
Animated.timing(scale, { toValue: 1.2, useNativeDriver: true, duration: 300 })

// NOT supported - must use useNativeDriver: false
Animated.timing(width, { toValue: 200, useNativeDriver: false, duration: 300 })
Animated.timing(backgroundColor, { toValue: '...', useNativeDriver: false, duration: 300 })

Mixing Native and Non-Native Animations

When you need to animate both native-driver-compatible and incompatible properties simultaneously, you must use two separate Animated.Values — one with useNativeDriver: true and one with useNativeDriver: false. You cannot use the same Animated.Value for both native and non-native driven animations.

A common pattern is running the transform and opacity (native) in a parallel group while running a color change (non-native) in a separate parallel group started at the same time.

// Two separate animations started together
Animated.timing(opacity, {
  toValue: 1,
  duration: 400,
  useNativeDriver: true,  // GPU
}).start();

Animated.timing(bgColor, {
  toValue: 1,
  duration: 400,
  useNativeDriver: false, // JS thread
}).start();

Measuring Animation Performance

React Native DevTools and Flipper can show you the frame rate of your app in real time. Look for the UI thread FPS (native rendering) and the JS thread FPS (JavaScript execution). With useNativeDriver, UI thread FPS should stay at 60 even when JS thread FPS drops.

In development mode, enable the performance monitor from the developer menu (shake device or press Cmd+D/Ctrl+D in simulator). The monitor shows both threads' frame rates overlaid on the app.

// Enable in development via developer menu:
// Shake device > Show Perf Monitor
// Or programmatically:
import { PerfMonitor } from 'react-native';
// Not an actual API - use the developer menu
// or Flipper performance plugin

Native Driver with Spring and Decay

The native driver works with all three animation types — Animated.timing, Animated.spring, and Animated.decay — as well as composition methods like Animated.parallel and Animated.sequence. Just add useNativeDriver: true to every leaf animation in the group.

The rule is: every animation in a composed group must have the same driver setting. Mixing native and non-native animated values inside a single Animated.parallel group will cause an error.

Animated.parallel([
  Animated.spring(scale, {
    toValue: 1,
    tension: 80,
    friction: 8,
    useNativeDriver: true,
  }),
  Animated.timing(opacity, {
    toValue: 1,
    duration: 300,
    useNativeDriver: true,
  }),
]).start();

Easing Functions and Native Driver

Easing functions are fully compatible with the native driver. React Native ships an Easing module with common curves: Easing.linear, Easing.ease, Easing.easeIn, Easing.easeOut, Easing.easeInOut, and configurable curves like Easing.bezier.

The easing curve is serialized and sent to the native side along with the animation config, so easing does not require JavaScript frame-by-frame computation. All the smoothness of custom easing with all the performance of native driving.

import { Animated, Easing } from 'react-native';

Animated.timing(translateY, {
  toValue: 0,
  duration: 500,
  easing: Easing.out(Easing.cubic), // decelerate into place
  useNativeDriver: true,
}).start();

// Custom bezier curve:
Animated.timing(scale, {
  toValue: 1,
  duration: 400,
  easing: Easing.bezier(0.25, 0.46, 0.45, 0.94),
  useNativeDriver: true,
}).start();

Interpolation with Native Driver

Interpolation also works with the native driver. When you call animatedValue.interpolate(), the interpolation config is serialized and evaluated natively alongside the animation. This means you can drive transforms and opacity through interpolation at 60fps without JavaScript involvement.

A common pattern is a single scroll position value (from ScrollView) interpolating into multiple header properties — opacity, scale, translateY — all natively driven for smooth parallax effects.

const scrollY = useRef(new Animated.Value(0)).current;

const headerOpacity = scrollY.interpolate({
  inputRange: [0, 100],
  outputRange: [1, 0],
  extrapolate: 'clamp',
});

const headerScale = scrollY.interpolate({
  inputRange: [0, 100],
  outputRange: [1, 0.8],
  extrapolate: 'clamp',
});

// Both driven natively by scroll position

Animated.event and Native ScrollView

Animated.event maps a native event's value directly to an Animated.Value without passing through JavaScript at all when useNativeDriver: true is set. The scroll offset from a ScrollView can feed directly into animated header effects completely on the native thread.

This is the foundation of native-thread parallax scroll effects — the most complex animation pattern in React Native — achieved without any JavaScript overhead per scroll event.

const scrollY = useRef(new Animated.Value(0)).current;

<Animated.ScrollView
  onScroll={Animated.event(
    [{ nativeEvent: { contentOffset: { y: scrollY } } }],
    { useNativeDriver: true }
  )}
  scrollEventThrottle={16}
>

Common Pitfalls with Native Driver

Common mistakes when adopting the native driver:

  • Animating unsupported properties — causes a silent fallback or error. Test with layout properties separately.
  • Calling setValue mid-animation — setValue works on both drivers but use it before starting, not while running.
  • Missing cleanup — always stop animations on unmount to prevent state updates on unmounted components.
  • Mixing drivers in one Value — one Animated.Value can only be driven by one driver type across its lifetime.

When to Skip Native Driver

You must set useNativeDriver: false for animations that affect layout (width, height, padding) or colors. These require the layout engine to recalculate positions and cannot be pre-serialized. Accept the JS-thread cost for these and ensure JS is not heavily loaded during layout animations.

A practical approach: use native driver for entrance/exit animations (transforms + opacity) and JS driver only for interactive layout changes like expanding accordion panels or resizing inputs. Keep layout animations short (under 300ms) to minimize the window of vulnerability.

// Layout animation: must use JS driver
Animated.timing(height, {
  toValue: 200,
  duration: 250,
  useNativeDriver: false, // required for height
}).start();

// But the card's entrance can still be native:
Animated.timing(opacity, {
  toValue: 1,
  duration: 250,
  useNativeDriver: true,
}).start();

Quick Check

Test your understanding of React Native Mobile Development concepts from this lesson.

Lesson Recap

In this lesson you learned: useNativeDriver: true serializes animation config to the native thread, enabling 60fps animations even when JavaScript is busy, only transform and opacity properties support the native driver, and Animated.event with useNativeDriver lets scroll position drive animations without any JS overhead per frame. Next up we explore React Native Reanimated 3 for even more powerful gesture-driven animations.

Questions Fréquemment Posées

La leçon « useNativeDriver pour des animations à 60 images/s » est-elle gratuite ?

Oui — le texte complet de « useNativeDriver pour des animations à 60 images/s » est gratuit à lire ici sur le web. Pour la pratiquer de manière interactive (un éditeur de code intégré et un tuteur IA 24/7) et déverrouiller le reste du cours React Native Academy, passe à CoddyKit PRO. Le cours React Native Academy comprend 4 leçons au total.

Qu'est-ce que j'apprendrai dans « useNativeDriver pour des animations à 60 images/s » ?

Activez useNativeDriver: true pour les animations de type timing et spring afin de déporter le travail vers le thread natif, découvrez quelles propriétés sont compatibles et mesurez le gain de perfor… Tu pratiques React Native Academy avec du code pratique que tu exécutes directement dans le navigateur, et un tuteur IA 24/7 répond à tes questions au fur et à mesure que tu avances dans la leçon.

Dois-je avoir de l'expérience pour commencer React Native Academy ?

Aucune expérience préalable n'est requise. React Native Academy sur CoddyKit est structuré pour les débutants jusqu'aux apprenants avancés, donc tu peux commencer ici ou depuis le début et avancer à ton rythme. Ceci est la leçon 4 sur 4.

Combien de temps prend la leçon « useNativeDriver pour des animations à 60 images/s » ?

La plupart des leçons CoddyKit prennent environ 5–10 minutes. Chacune est courte et interactive, tu progresses régulièrement et tu repiques exactement où tu t'es arrêté sur le web et l'app.

Peux-tu écrire et exécuter du code dans cette leçon React Native Academy ?

Oui. Chaque leçon React Native Academy inclut un éditeur de code intégré, tu écris et exécutes du vrai code directement dans ton navigateur et tu reçois des retours IA instantanés — aucune configuration locale requise.

Toutes les leçons de ce cours

  1. Animated.Value et Animated.View
  2. Animations avec ressort et décélération
  3. Animer plusieurs propriétés en parallèle et en séquence
  4. useNativeDriver pour des animations à 60 images/s
← Retour à React Native Academy