ICMP und die Rolle von Ping und Traceroute

The Internet Control Message Protocol (ICMP) carries control and error messages for the IP layer. It is not used to send application data; it reports problems like unreachable hosts and assists diagnostics.

ICMP messages are wrapped in IP packets but ICMP is considered part of the network layer. Unlike TCP or UDP, it has no ports, only message types and codes.

Key ICMP types include:

• Echo Request / Echo Reply (used by ping).
• Destination Unreachable.
• Time Exceeded (used by traceroute).

ping sends an ICMP Echo Request and waits for an Echo Reply. The round-trip time tells you latency, and missing replies suggest packet loss or an unreachable host.

Ping reports time per packet and a summary with packet loss and min/avg/max round-trip times. Consistent times mean a healthy path; jitter or loss points to network trouble.

Every IP packet carries a Time To Live (TTL) that decrements at each router. When it hits zero the router drops the packet and sends back an ICMP Time Exceeded message. Traceroute exploits exactly this.

traceroute sends packets with increasing TTL: 1, then 2, then 3. Each router along the path returns a Time Exceeded message, revealing the hops between you and the destination.

Each line is one hop with three timing samples. Asterisks mean no reply from that hop, which can be normal if a router is configured not to answer.

Many firewalls drop ICMP for security. A failed ping does not always mean the host is down; it may simply not answer Echo Requests. Verify with a TCP-based check too.

For ongoing path monitoring, mtr combines ping and traceroute, continuously updating per-hop loss and latency, which is excellent for spotting an intermittent bad hop.

You can vary the ping payload size to test how a path handles larger packets, which helps uncover MTU or fragmentation issues.

Test your ICMP knowledge.

You learned the role of ICMP.

• ICMP carries control/error messages for IP, with no ports.
• Ping uses Echo Request/Reply for reachability and latency.
• Traceroute uses TTL and Time Exceeded to map the path; blocked ICMP can hide a live host.