Temperatur und Luftfeuchtigkeit auslesen
Rufen Sie die Bibliothek auf, um echte Klimawerte zu erhalten.
Temperatur und Luftfeuchtigkeit auslesen ist eine kostenlose Arduino & IoT Academy-Lektion auf CoddyKit. Dies ist Lektion 3 von 4. Du kannst die komplette Lektion unten kostenlos lesen – dann übst du sie direkt im Browser mit einem integrierten Code-Editor und einem KI-Tutor rund um die Uhr. Sie ist Teil des Arduino & IoT Academy-Lernpfads, und dein Fortschritt wird über Web und CoddyKit-App synchronisiert. Der Arduino & IoT Academy-Kurs umfasst insgesamt 4 Lektionen.
Teile dieser Lektion wurden noch nicht übersetzt und werden auf Englisch angezeigt.
Time to Read
Your sensor is wired and the library is ready. Now you will ask it for real numbers and print them to the Serial Monitor. 🌡️
Read Temperature
Call readTemperature() to get the current value in Celsius. Store it in a float because the reading often has decimals.
float t = dht.readTemperature();Read Humidity
Call readHumidity() to get the moisture in the air as a percentage. Like temperature, save it in a float variable.
float h = dht.readHumidity();Want Fahrenheit?
Pass true to readTemperature to get Fahrenheit instead of Celsius. One small argument switches the whole unit.
float f = dht.readTemperature(true);Print the Values
Send your readings to the Serial Monitor so you can watch them live. Labels next to numbers make the output easy to read.
Serial.print("Temp: ");
Serial.println(t);Show Both at Once
You can print temperature and humidity together on one line. A short label before each value keeps the data clear.
Serial.print(h);
Serial.println("% humidity");DHT Is Slow
A DHT updates only about once per second. Reading faster than that just returns stale or failed values, so be patient.
Pace Your Loop
Add a short delay() at the end of loop so you read at a sensible pace. Two seconds is a safe, comfortable gap.
delay(2000);Compute Heat Index
The library can also estimate the heat index, how hot it feels, from temperature and humidity together. It is one handy call.
float hi = dht.computeHeatIndex(t, h, false);Use the Readings
Once you have the numbers, you can act on them: turn on a fan above a threshold or log values for later analysis.
Read Once, Reuse
Save each reading into a variable once per loop, then reuse it. Calling the sensor many times in a row only slows you down.
Quick Check
You want the temperature in Fahrenheit. Which call returns it?
Recap
You read temperature and humidity into floats, printed them with labels, paced the loop, and even computed how hot it feels. 🎉
Häufig gestellte Fragen
Ist die Lektion „Temperatur und Luftfeuchtigkeit auslesen“ kostenlos?
Ja — der vollständige Text von „Temperatur und Luftfeuchtigkeit auslesen“ ist hier im Web kostenlos zu lesen. Um sie interaktiv zu üben (integrierter Code-Editor und 24/7 KI-Tutor) und den Rest des Arduino & IoT Academy-Kurses freizuschalten, upgrade auf CoddyKit PRO. Der Arduino & IoT Academy-Kurs umfasst insgesamt 4 Lektionen.
Was lerne ich in „Temperatur und Luftfeuchtigkeit auslesen“?
Rufen Sie die Bibliothek auf, um echte Klimawerte zu erhalten. Du übst Arduino & IoT Academy mit praktischem Code, den du direkt im Browser ausführst, und ein 24/7 KI-Tutor beantwortet deine Fragen während du die Lektion bearbeitest.
Brauche ich Erfahrung, um Arduino & IoT Academy zu starten?
Keine Vorkenntnisse erforderlich. Arduino & IoT Academy auf CoddyKit ist für Anfänger bis fortgeschrittene Lernende strukturiert, sodass du hier starten oder von Anfang an beginnen und in deinem eigenen Tempo voranschreiten kannst. Dies ist Lektion 3 von 4.
Wie lange dauert die Lektion „Temperatur und Luftfeuchtigkeit auslesen“?
Die meisten CoddyKit-Lektionen dauern etwa 5–10 Minuten. Jede ist kompakt und interaktiv, sodass du stetig Fortschritte machst und genau dort weitermachst, wo du aufgehört hast – im Web und in der App.
Kann ich in dieser Arduino & IoT Academy-Lektion Code schreiben und ausführen?
Ja. Jede Arduino & IoT Academy-Lektion enthält einen integrierten Code-Editor, sodass du echten Code direkt in deinem Browser schreibst und ausführst und sofort KI-Feedback erhältst — ohne lokale Einrichtung erforderlich.
Alle Lektionen in diesem Kurs
- DHT11/DHT22 anschließen
- Die DHT-Bibliothek installieren
- Temperatur und Luftfeuchtigkeit auslesen
- Fehlgeschlagene Messungen behandeln