Board und Port auswählen, dann hochladen
Wählen Sie das richtige Board und den seriellen Port, um den Code zu flashen
Board und Port auswählen, dann hochladen ist eine kostenlose Arduino & IoT Academy-Lektion auf CoddyKit. Dies ist Lektion 3 von 4. Du kannst die komplette Lektion unten kostenlos lesen – dann übst du sie direkt im Browser mit einem integrierten Code-Editor und einem KI-Tutor rund um die Uhr. Sie ist Teil des Arduino & IoT Academy-Lernpfads, und dein Fortschritt wird über Web und CoddyKit-App synchronisiert. Der Arduino & IoT Academy-Kurs umfasst insgesamt 4 Lektionen.
Teile dieser Lektion wurden noch nicht übersetzt und werden auf Englisch angezeigt.
Two Settings First
Before uploading, the IDE needs two answers: which board you have and which port it is plugged into. Set these once and you are ready. 🙂
Plug It In
Connect the Uno with its USB cable first. The board's power LED should glow, showing the computer is feeding it electricity.
Open Tools Menu
Everything you need lives in the Tools menu at the top. Both the board choice and the port choice hide inside it.
Select the Board
Under Tools, open Board and choose Arduino Uno. This tells the IDE exactly which chip your code is built for.
Why Board Matters
Picking the wrong board can make the upload fail or behave oddly, because each model speaks its own dialect.
Find the Port
Next, open Port in the Tools menu. This is the doorway your computer uses to talk to the connected board.
Spot the Right Port
On Windows the port looks like COM3; on Mac it starts with /dev/cu. Unplug and replug to see which entry appears.
No Port Showing
If no port appears, try another USB cable. Some cheap cables only carry power, not the data your code needs.
Verify Before Upload
Click Verify first to compile your sketch. Catching errors here is faster than waiting for a failed upload.
Hit Upload
Now press Upload. Tiny RX and TX lights on the board will flicker as your code streams into the chip.
Done Uploading
When the console shows Done uploading, your sketch is now running on the board, even if you unplug the cable. ✨
Quick Check
Let's lock in the two must-set choices.
Recap
You set the board, picked the right port, verified, and uploaded. Seeing Done uploading means success. 🎉
Häufig gestellte Fragen
Ist die Lektion „Board und Port auswählen, dann hochladen“ kostenlos?
Ja — der vollständige Text von „Board und Port auswählen, dann hochladen“ ist hier im Web kostenlos zu lesen. Um sie interaktiv zu üben (integrierter Code-Editor und 24/7 KI-Tutor) und den Rest des Arduino & IoT Academy-Kurses freizuschalten, upgrade auf CoddyKit PRO. Der Arduino & IoT Academy-Kurs umfasst insgesamt 4 Lektionen.
Was lerne ich in „Board und Port auswählen, dann hochladen“?
Wählen Sie das richtige Board und den seriellen Port, um den Code zu flashen Du übst Arduino & IoT Academy mit praktischem Code, den du direkt im Browser ausführst, und ein 24/7 KI-Tutor beantwortet deine Fragen während du die Lektion bearbeitest.
Brauche ich Erfahrung, um Arduino & IoT Academy zu starten?
Keine Vorkenntnisse erforderlich. Arduino & IoT Academy auf CoddyKit ist für Anfänger bis fortgeschrittene Lernende strukturiert, sodass du hier starten oder von Anfang an beginnen und in deinem eigenen Tempo voranschreiten kannst. Dies ist Lektion 3 von 4.
Wie lange dauert die Lektion „Board und Port auswählen, dann hochladen“?
Die meisten CoddyKit-Lektionen dauern etwa 5–10 Minuten. Jede ist kompakt und interaktiv, sodass du stetig Fortschritte machst und genau dort weitermachst, wo du aufgehört hast – im Web und in der App.
Kann ich in dieser Arduino & IoT Academy-Lektion Code schreiben und ausführen?
Ja. Jede Arduino & IoT Academy-Lektion enthält einen integrierten Code-Editor, sodass du echten Code direkt in deinem Browser schreibst und ausführst und sofort KI-Feedback erhältst — ohne lokale Einrichtung erforderlich.
Alle Lektionen in diesem Kurs
- Rundgang durch das Arduino Uno
- Die Arduino IDE installieren
- Board und Port auswählen, dann hochladen
- Das integrierte Blink-Beispiel ausführen