Blockchain Smart Contracts with Solidity · درس

صنّاع السوق الآليون ومجمّعات السيولة

تعرّف إلى كيفية عمل صنّاع السوق الآليين (AMMs) مثل Uniswap، وكيف تتيح مجمّعات السيولة التداول اللامركزي.

صنّاع السوق الآليون ومجمّعات السيولة درس مجاني في Blockchain Smart Contracts with Solidity على CoddyKit. هذا هو الدرس 1 من أصل 4. يمكنك قراءة الدرس كاملاً أدناه مجاناً — ثم تمرن عليه مباشرة في المتصفح باستخدام محرر أكواد مدمج ومدرس ذكاء اصطناعي متاح 24/7. هذا الدرس جزء من مسار التعلم في Blockchain Smart Contracts with Solidity، وتقدمك يتزامن عبر الويب وتطبيق CoddyKit. تتضمن دورة Blockchain Smart Contracts with Solidity 4 دروس في المجموع.

بعض أجزاء هذا الدرس لم تُترجم بعد وتظهر باللغة الإنجليزية.

Welcome to AMMs

Decentralized Finance (DeFi) has revolutionized how we trade assets. At its heart are Automated Market Makers (AMMs).

AMMs power decentralized exchanges (DEXs) like Uniswap, allowing users to swap tokens without traditional buyers and sellers.

Instead of matching orders, AMMs use mathematical formulas and liquidity pools.

Order Books vs. AMMs

Traditional exchanges use order books, where buyers and sellers list their desired prices. Trades only happen when bids and asks match.

Order Books: Centralized, requires matching orders, can suffer from low liquidity.
AMMs: Decentralized, uses liquidity pools, always offers a price determined by a formula.

AMMs solve the liquidity problem for many token pairs on a blockchain by always providing a market.

The Power of Liquidity Pools

An AMM's backbone is the liquidity pool. This is a collection of two or more tokens locked in a smart contract.

For example, a common pool might hold ETH and a stablecoin like DAI. Users can swap between these tokens directly from the pool.

These pools are funded by individuals called Liquidity Providers (LPs).

Meet the Constant Product Formula

Most AMMs, like Uniswap, use the constant product formula: x * y = k.

x is the quantity of the first token.
y is the quantity of the second token.
k is a constant product that must remain unchanged after a trade.

When you swap tokens, the quantities of x and y change, but their product k stays the same, determining the new price ratio.

How to Become an LP

Liquidity Providers (LPs) deposit an equal value of two tokens into a liquidity pool. For example, $1000 worth of ETH and $1000 worth of DAI.

In return, LPs receive Liquidity Pool (LP) tokens. These tokens represent their share of the pool.

LP tokens can be redeemed later to withdraw your original deposit plus any accumulated fees.

Adding Liquidity in Practice

When an LP adds liquidity, they increase the total supply of x and y in the pool, which also increases the constant k.

The AMM smart contract ensures that tokens are added in the correct ratio to maintain the pool's balance and prevent immediate price changes.

This process makes the pool deeper, allowing for larger trades with less price impact.

Swapping Tokens

When a user wants to swap Token A for Token B, they send Token A to the liquidity pool.

The AMM's smart contract then calculates how much Token B to give back, based on the x * y = k formula.

The pool's balance shifts, and the price of the tokens adjusts automatically according to the formula.

Code Example: Simulating a Swap

Let's see a simplified Solidity contract that simulates how an AMM might perform a swap using the constant product formula.

This example demonstrates the core calculation and reserve update.

pragma solidity ^0.8.0;

contract SimpleAmmSwap {
    uint public tokenXReserve = 1000 * 10**18; // 1000 tokens (e.g., ETH) with 18 decimals
    uint public tokenYReserve = 1000 * 10**18; // 1000 tokens (e.g., DAI) with 18 decimals
    uint public k = tokenXReserve * tokenYReserve;

    // Simulate a swap from Token X to Token Y
    // For simplicity, no actual token transfers, just reserve updates.
    function swapXForY(uint amountInX) public returns (uint amountOutY) {
        require(amountInX > 0, "Amount in must be positive");
        
        // Calculate new reserves and output amount
        uint newXReserve = tokenXReserve + amountInX;
        uint newYReserve = k / newXReserve;
        amountOutY = tokenYReserve - newYReserve;

        require(amountOutY > 0, "Not enough liquidity for swap");

        // Update reserves
        tokenXReserve = newXReserve;
        tokenYReserve = newYReserve;

        // Note: In a real AMM, actual token transfers would occur here.
    }

    // A getter to check current reserves
    function getReserves() public view returns (uint, uint) {
        return (tokenXReserve, tokenYReserve);
    }
}

Understanding Impermanent Loss

One major risk for LPs is impermanent loss. This occurs when the price of the assets in the liquidity pool changes relative to when you deposited them.

If the price ratio diverges significantly, the value of your tokens withdrawn from the pool might be less than if you had simply held them outside the pool.

It's called "impermanent" because the loss only becomes permanent if you withdraw your liquidity before the prices return to their original ratio.

LP Fees and Rewards

Despite impermanent loss, LPs are incentivized by earning a share of the trading fees generated by the pool.

Each time a trade occurs, a small percentage (e.g., 0.3%) of the swapped amount is added to the liquidity pool.

These fees accumulate in the pool and are distributed proportionally to LPs when they withdraw their liquidity, compensating them for providing capital and taking on impermanent loss risk.

Quick Check: AMM Basics

Test your understanding of Automated Market Makers and Liquidity Pools.

Recap: AMMs & Liquidity Pools

We've explored how Automated Market Makers (AMMs) provide decentralized trading by using liquidity pools instead of traditional order books.

Key takeaways:

AMMs use formulas like x * y = k to determine prices.
Liquidity Providers (LPs) fund pools and earn trading fees.
Impermanent loss is a risk for LPs due to price divergence.

Understanding these concepts is vital for navigating the DeFi landscape!

الأسئلة الشائعة

هل درس «صنّاع السوق الآليون ومجمّعات السيولة» مجاني؟

نعم — نص درس «صنّاع السوق الآليون ومجمّعات السيولة» كامل متاح مجاناً هنا على الويب. لتمرينه بشكل تفاعلي (محرر أكواد مدمج ومدرس ذكاء اصطناعي متاح 24/7) وفتح باقي دورة Blockchain Smart Contracts with Solidity، انتقل إلى CoddyKit PRO. تتضمن دورة Blockchain Smart Contracts with Solidity 4 دروس في المجموع.

ماذا ستتعلم في «صنّاع السوق الآليون ومجمّعات السيولة»؟

تعرّف إلى كيفية عمل صنّاع السوق الآليين (AMMs) مثل Uniswap، وكيف تتيح مجمّعات السيولة التداول اللامركزي. تتمرن على Blockchain Smart Contracts with Solidity مع أكواد عملية تشغلها مباشرة في المتصفح، ومدرس ذكاء اصطناعي متاح 24/7 يجيب على أسئلتك أثناء عملك.

هل أحتاج إلى خبرة سابقة لأبدأ Blockchain Smart Contracts with Solidity؟

لا تُشترط خبرة سابقة. Blockchain Smart Contracts with Solidity على CoddyKit منظم للمبتدئين حتى المتقدمين، لذا يمكنك البدء من هنا أو من البداية والتقدم بسرعتك الخاصة. هذا هو الدرس 1 من أصل 4.

كم من الوقت يستغرق درس «صنّاع السوق الآليون ومجمّعات السيولة»؟

معظم دروس CoddyKit تستغرق حوالي 5–10 دقائق. كل منها موجز وتفاعلي، لذا تحرز تقدماً مستمراً وتستأنف من حيث توقفت عبر الويب والتطبيق.

هل يمكنني كتابة وتشغيل أكواد في درس Blockchain Smart Contracts with Solidity هذا؟

نعم. كل درس في Blockchain Smart Contracts with Solidity يتضمن محرر أكواد مدمج، لذا تكتب وتشغل أكواداً حقيقية مباشرة في متصفحك وتحصل على تعليقات فورية من الذكاء الاصطناعي — بدون إعداد محلي.

جميع الدروس في هذه الدورة

← العودة إلى Blockchain Smart Contracts with Solidity