로컬 네트워크와 포크
테스트 환경
로컬 네트워크와 포크은(는) CoddyKit의 무료 Web3 & DApp Development Fundamentals 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Web3 & DApp Development Fundamentals 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Web3 & DApp Development Fundamentals 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
The Hardhat Network
Hardhat ships with a built-in local Ethereum network designed for development. It runs in-memory, mines blocks instantly, and gives you funded test accounts.
- No real ETH or gas costs.
- Deterministic accounts you can reuse.
- Rich error messages and stack traces.
Starting a Local Node
Run a standalone JSON-RPC server so wallets and front-ends can connect:
npx hardhat nodeThis prints 20 funded accounts with their private keys and listens on http://127.0.0.1:8545.
npx hardhat nodeThe localhost Network
To target the running node, define a localhost network in your config:
module.exports = {
solidity: "0.8.24",
networks: {
localhost: { url: "http://127.0.0.1:8545" },
},
};Then deploy with npx hardhat run scripts/deploy.js --network localhost.
module.exports = {
solidity: "0.8.24",
networks: {
localhost: { url: "http://127.0.0.1:8545" },
},
};In-Process vs Standalone
There are two ways to use the Hardhat Network:
- In-process — a fresh network spun up automatically when you run
testorrunwithout--network. State is discarded after. - Standalone — started with
npx hardhat nodeand kept alive for external connections.
What Is Forking
Forking creates a local copy of a real network (like Ethereum mainnet) at a given block. You get all the on-chain state — deployed contracts, balances, token data — but can experiment freely.
This is perfect for testing against live protocols such as Uniswap or Aave without spending real funds.
Configuring a Fork
Enable forking by pointing the Hardhat network at an archive RPC URL:
module.exports = {
networks: {
hardhat: {
forking: {
url: "https://mainnet.example-rpc.io/KEY",
},
},
},
};You typically need an archive node provider for full historical state.
module.exports = {
networks: {
hardhat: {
forking: {
url: "https://mainnet.example-rpc.io/KEY",
},
},
},
};Pinning a Block Number
For reproducible tests, pin the fork to a specific block:
forking: {
url: "https://mainnet.example-rpc.io/KEY",
blockNumber: 19000000,
}Pinning keeps state stable and lets Hardhat cache responses, so tests run faster and never drift as the chain advances.
forking: {
url: "https://mainnet.example-rpc.io/KEY",
blockNumber: 19000000,
}Impersonating Accounts
On a fork you can act as any address — even one you do not own — to test flows like a whale moving tokens:
await hre.network.provider.request({
method: "hardhat_impersonateAccount",
params: ["0xWhaleAddress"],
});
const whale = await hre.ethers.getSigner("0xWhaleAddress");await hre.network.provider.request({
method: "hardhat_impersonateAccount",
params: ["0xWhaleAddress"],
});
const whale = await hre.ethers.getSigner("0xWhaleAddress");Time and Block Manipulation
The local network exposes special RPC methods to control time and blocks, useful for testing vesting or auctions:
// Advance time by 1 day
await hre.network.provider.send("evm_increaseTime", [86400]);
// Mine a new block
await hre.network.provider.send("evm_mine");// Advance time by 1 day
await hre.network.provider.send("evm_increaseTime", [86400]);
// Mine a new block
await hre.network.provider.send("evm_mine");Resetting State
You can reset the fork back to a clean snapshot between tests:
await hre.network.provider.request({
method: "hardhat_reset",
params: [],
});This restores the original forked state without restarting the process, keeping test runs isolated.
await hre.network.provider.request({
method: "hardhat_reset",
params: [],
});Snapshots and Reverts
Beyond a full reset, you can take lightweight snapshots and revert to them, which is how test fixtures work under the hood:
const id = await hre.network.provider.send("evm_snapshot");
// ... run some transactions ...
await hre.network.provider.send("evm_revert", [id]);Each snapshot id can be reverted to once.
const id = await hre.network.provider.send("evm_snapshot");
// ... run some transactions ...
await hre.network.provider.send("evm_revert", [id]);Quick Check
Test your understanding of local networks and forking.
Recap
You learned to run and fork local networks.
npx hardhat nodestarts a standalone JSON-RPC node with funded accounts.- The in-process network is used automatically for tests and discarded after.
- Forking copies live mainnet state locally for safe experimentation.
- Pin
blockNumberfor reproducibility and caching. - Special RPC methods impersonate accounts, advance time, mine blocks, and reset state.
AI 튜터와 함께 Web3 & DApp Development Fundamentals을(를) 배우세요 — 무료
브라우저에서 실제 코드를 작성하고 실행하며, 24/7 AI 튜터로부터 즉각적인 도움을 받고, 웹이나 앱에서 중단한 부분부터 계속 학습하세요.
- 코스
- 29
- 레슨
- 105
자주 묻는 질문
“로컬 네트워크와 포크” 강의는 무료인가요?
네 — “로컬 네트워크와 포크” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Web3 & DApp Development Fundamentals 강의 전체를 잠금 해제할 수 있습니다. Web3 & DApp Development Fundamentals 강의에는 총 4개의 강의가 포함되어 있습니다.
“로컬 네트워크와 포크”에서 뭘 배우나요?
테스트 환경 브라우저에서 직접 실행하는 실습 코드로 Web3 & DApp Development Fundamentals을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Web3 & DApp Development Fundamentals을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Web3 & DApp Development Fundamentals은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“로컬 네트워크와 포크” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Web3 & DApp Development Fundamentals 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Web3 & DApp Development Fundamentals 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- Hardhat 설정
- 컨트랙트 컴파일하기
- 스크립트와 작업
- 로컬 네트워크와 포크