토큰 구현하기
transfer와 approve
토큰 구현하기은(는) CoddyKit의 무료 Web3 & DApp Development Fundamentals 강의입니다. 이것은 4개 중 2번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Web3 & DApp Development Fundamentals 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Web3 & DApp Development Fundamentals 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Building a Token
Now you will implement the core of an ERC-20 token from scratch. Understanding the internals helps you debug and audit real tokens, even when you later use libraries.
We will focus on the state, transfer, and approve.
Core State Variables
A token needs to track balances and total supply. Balances are stored in a mapping from address to amount.
<code>contract Token {
string public name = 'MyToken';
string public symbol = 'MTK';
uint8 public decimals = 18;
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
}</code>The Constructor
The constructor mints an initial supply to the deployer. We increase totalSupply and credit the creator's balance.
<code>constructor(uint256 initialSupply) {
totalSupply = initialSupply;
balanceOf[msg.sender] = initialSupply;
}</code>The Events
Declare the two required events. We will emit Transfer on every movement and Approval when an allowance is set.
<code>event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);</code>Implementing transfer
The transfer function moves tokens from the caller to a recipient. It must check the caller has enough balance and emit the Transfer event.
<code>function transfer(address to, uint256 amount) public returns (bool) {
require(balanceOf[msg.sender] >= amount, 'insufficient balance');
balanceOf[msg.sender] -= amount;
balanceOf[to] += amount;
emit Transfer(msg.sender, to, amount);
return true;
}</code>Guarding Against Zero Address
Sending tokens to address(0) effectively destroys them by accident. Many implementations reject it explicitly.
<code>function transfer(address to, uint256 amount) public returns (bool) {
require(to != address(0), 'transfer to zero');
require(balanceOf[msg.sender] >= amount, 'insufficient');
balanceOf[msg.sender] -= amount;
balanceOf[to] += amount;
emit Transfer(msg.sender, to, amount);
return true;
}</code>The allowance Mapping
To support delegated transfers we add a nested mapping: owner to spender to approved amount.
<code>mapping(address => mapping(address => uint256)) public allowance;</code>Implementing approve
The approve function lets the caller authorize a spender to move up to a certain amount of their tokens. It records the allowance and emits Approval.
<code>function approve(address spender, uint256 amount) public returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}</code>Overflow Safety
Since Solidity 0.8, arithmetic reverts on overflow and underflow automatically. The subtraction in transfer is safe: if the balance is too low it reverts, though the explicit require gives a clearer error.
Why Return bool
The standard specifies a bool return for compatibility. We return true on success. On failure we revert, which is the modern convention and safer than silently returning false.
Putting It Together
With state, events, transfer, and approve in place you have a functioning fungible token. The next lesson adds transferFrom to complete the allowance flow.
<code>// state + constructor + events + transfer + approve
// = a minimal working ERC-20</code>Quick Check
Test your understanding of implementing a token.
Recap
You implemented the core of an ERC-20 token:
- State: name, symbol, decimals, totalSupply, balanceOf mapping
- Constructor mints the initial supply to the deployer
transferchecks balance, updates state, emitsTransferapproverecords an allowance and emitsApproval- Guard against the zero address and rely on 0.8 overflow safety
AI 튜터와 함께 Web3 & DApp Development Fundamentals을(를) 배우세요 — 무료
브라우저에서 실제 코드를 작성하고 실행하며, 24/7 AI 튜터로부터 즉각적인 도움을 받고, 웹이나 앱에서 중단한 부분부터 계속 학습하세요.
- 코스
- 29
- 레슨
- 105
자주 묻는 질문
“토큰 구현하기” 강의는 무료인가요?
네 — “토큰 구현하기” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Web3 & DApp Development Fundamentals 강의 전체를 잠금 해제할 수 있습니다. Web3 & DApp Development Fundamentals 강의에는 총 4개의 강의가 포함되어 있습니다.
“토큰 구현하기”에서 뭘 배우나요?
transfer와 approve 브라우저에서 직접 실행하는 실습 코드로 Web3 & DApp Development Fundamentals을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Web3 & DApp Development Fundamentals을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Web3 & DApp Development Fundamentals은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 2번째 강의입니다.
“토큰 구현하기” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Web3 & DApp Development Fundamentals 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Web3 & DApp Development Fundamentals 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.