셸 스크립트의 함수와 인수
재사용 가능한 함수로 스크립트를 구성하고, 인수를 전달하고, 반환 값을 사용하며, Bash에서 변수의 범위를 이해해 보세요.
셸 스크립트의 함수와 인수은(는) CoddyKit의 무료 Linux Command Line Mastery 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Linux Command Line Mastery 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Linux Command Line Mastery 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
Why Functions?
You can write variables, conditionals, and loops, but as scripts grow they get repetitive. Functions let you name a block of logic and reuse it, keeping scripts clean and testable.
Defining a Function
A Bash function is a name followed by () and a body in braces. Define it before you call it.
greet() {
echo 'Hello from a function'
}
greetPassing Arguments
Functions receive arguments positionally: $1, $2, and so on. Just like the whole script does.
greet() {
echo "Hello, $1"
}
greet AliceAll Arguments at Once
$@ expands to all arguments and $# gives their count, handy for variadic helpers.
show() {
echo "count: $#"
for a in "$@"; do echo "arg: $a"; done
}
show one two threeReturn Status Codes
return sets an exit status (0-255), where 0 means success. Check it with $?.
is_even() {
if [ $(( $1 % 2 )) -eq 0 ]; then return 0; else return 1; fi
}
is_even 4 && echo evenReturning Real Values
Since return only gives a status, output data with echo and capture it via command substitution.
square() {
echo $(( $1 * $1 ))
}
result=$(square 5)
echo "result is $result"Local Variables
By default Bash variables are global. Use local inside functions to avoid clobbering outer variables.
calc() {
local total=0
for n in "$@"; do total=$(( total + n )); done
echo $total
}
calc 1 2 3 4Functions Calling Functions
Functions can call each other, letting you compose small pieces into larger behavior.
double() { echo $(( $1 * 2 )); }
quad() { double $(double $1); }
quad 3Default Argument Values
Use parameter expansion to supply a fallback when an argument is missing.
greet() {
local name=${1:-World}
echo "Hello, $name"
}
greetA Practical Helper
Functions shine for reusable utilities like logging with a timestamp prefix.
log() {
echo "[INFO] $*"
}
log 'Backup started'
log 'Backup finished'Organizing Scripts
A clean pattern: define all functions at the top, then a main function at the bottom that orchestrates them. This mirrors structured programming.
main() {
echo 'Running main'
}
main "$@"Quick Check
How do you reliably get a computed value back from a Bash function?
Recap
Functions make scripts modular:
- Define with
name() { ... } - Arguments are
$1,$@,$# return= status;echo+$()= valueslocalkeeps variables scoped
Compose small functions and orchestrate them from main.
AI 튜터와 함께 Linux Command Line Mastery을(를) 배우세요 — 무료
브라우저에서 실제 코드를 작성하고 실행하며, 24/7 AI 튜터로부터 즉각적인 도움을 받고, 웹이나 앱에서 중단한 부분부터 계속 학습하세요.
- 코스
- 12
- 레슨
- 48
자주 묻는 질문
“셸 스크립트의 함수와 인수” 강의는 무료인가요?
네 — “셸 스크립트의 함수와 인수” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Linux Command Line Mastery 강의 전체를 잠금 해제할 수 있습니다. Linux Command Line Mastery 강의에는 총 4개의 강의가 포함되어 있습니다.
“셸 스크립트의 함수와 인수”에서 뭘 배우나요?
재사용 가능한 함수로 스크립트를 구성하고, 인수를 전달하고, 반환 값을 사용하며, Bash에서 변수의 범위를 이해해 보세요. 브라우저에서 직접 실행하는 실습 코드로 Linux Command Line Mastery을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Linux Command Line Mastery을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Linux Command Line Mastery은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“셸 스크립트의 함수와 인수” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Linux Command Line Mastery 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Linux Command Line Mastery 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.