NAT 게이트웨이와 VPC에서의 인터넷 접근
비공개 VPC 서브넷 내부의 Lambda가 인터넷 접근을 잃는 이유와 NAT 게이트웨이 및 VPC 엔드포인트로 연결을 안전하게 복구하는 방법을 배웁니다.
NAT 게이트웨이와 VPC에서의 인터넷 접근은(는) CoddyKit의 무료 Serverless AWS Lambda Development 강의입니다. 이것은 4개 중 4번째 강의입니다. 아래에서 전체 강의를 무료로 읽을 수 있으며, 내장 코드 에디터와 24/7 AI 튜터와 함께 브라우저에서 직접 실습할 수 있습니다. 이 강의는 Serverless AWS Lambda Development 학습 경로의 일부이며, 진행 상황이 웹과 CoddyKit 앱에 동기화됩니다. Serverless AWS Lambda Development 강의에는 총 4개의 강의가 포함되어 있습니다.
이 강의의 일부는 아직 번역되지 않았으며 영어로 표시됩니다.
The Surprise
A Lambda in a VPC can reach private resources, but it loses default internet access. Calls to public APIs suddenly time out.
Why It Happens
VPC Lambdas have no public IP. Without a route to the internet, outbound calls to external endpoints have nowhere to go.
Public vs Private Subnets
A public subnet routes to an Internet Gateway; a private subnet does not. Always place Lambdas in private subnets for security.
Enter the NAT Gateway
A NAT gateway lives in a public subnet and lets private subnets make outbound internet calls while staying unreachable from the internet.
The Route Table
The private subnet route table sends internet-bound traffic to the NAT gateway, which forwards it through the Internet Gateway.
Destination Target
10.0.0.0/16 local
0.0.0.0/0 nat-0abc123NAT Costs Money
NAT gateways charge per hour plus per GB processed. For heavy traffic this adds up, so consider whether you truly need public internet access.
VPC Endpoints Instead
To reach AWS services like S3 or DynamoDB, use a VPC endpoint. Traffic stays on the AWS network with no NAT needed and no per-GB internet cost.
Gateway vs Interface Endpoints
S3 and DynamoDB use free gateway endpoints; most other services use interface endpoints (powered by PrivateLink) which are billed hourly.
Calling S3 Through an Endpoint
No code change is needed. With a gateway endpoint and the right route, this S3 call never leaves the AWS backbone.
import boto3
s3 = boto3.client('s3')
s3.put_object(Bucket='my-bucket', Key='log.txt', Body=b'hi')Choosing the Right Path
Need a public third-party API? Use a NAT gateway. Need only AWS services? Use VPC endpoints. Often you use endpoints to avoid NAT entirely.
Multi-AZ for Resilience
Deploy a NAT gateway per Availability Zone and put the Lambda in multiple subnets, so one AZ outage does not break connectivity.
Quick Check
Test your VPC networking knowledge.
Recap
You learned why VPC Lambdas lose internet access and how NAT gateways restore outbound access, while VPC endpoints reach AWS services privately and cheaply.
AI 튜터와 함께 Serverless AWS Lambda Development을(를) 배우세요 — 무료
브라우저에서 실제 코드를 작성하고 실행하며, 24/7 AI 튜터로부터 즉각적인 도움을 받고, 웹이나 앱에서 중단한 부분부터 계속 학습하세요.
- 코스
- 12
- 레슨
- 48
자주 묻는 질문
“NAT 게이트웨이와 VPC에서의 인터넷 접근” 강의는 무료인가요?
네 — “NAT 게이트웨이와 VPC에서의 인터넷 접근” 전체 내용을 이 웹사이트에서 무료로 읽을 수 있습니다. 인터랙티브하게 실습하려면(내장 코드 에디터와 24/7 AI 튜터), CoddyKit PRO로 업그레이드하면 Serverless AWS Lambda Development 강의 전체를 잠금 해제할 수 있습니다. Serverless AWS Lambda Development 강의에는 총 4개의 강의가 포함되어 있습니다.
“NAT 게이트웨이와 VPC에서의 인터넷 접근”에서 뭘 배우나요?
비공개 VPC 서브넷 내부의 Lambda가 인터넷 접근을 잃는 이유와 NAT 게이트웨이 및 VPC 엔드포인트로 연결을 안전하게 복구하는 방법을 배웁니다. 브라우저에서 직접 실행하는 실습 코드로 Serverless AWS Lambda Development을(를) 배우며, 24/7 AI 튜터가 강의를 진행하면서 질문에 답변해줍니다.
Serverless AWS Lambda Development을(를) 시작하는 데 경험이 필요한가요?
사전 경험은 필요하지 않습니다. CoddyKit의 Serverless AWS Lambda Development은(는) 초급자부터 고급 학습자까지를 위해 구성되어 있으므로, 여기서 시작하거나 처음부터 시작할 수 있으며 자신의 속도대로 진행할 수 있습니다. 이것은 4개 중 4번째 강의입니다.
“NAT 게이트웨이와 VPC에서의 인터넷 접근” 강의는 얼마나 걸리나요?
대부분의 CoddyKit 강의는 약 5~10분이 소요됩니다. 각 강의는 간결하고 인터랙티브하여 꾸준한 진행이 가능하며, 웹과 앱에서 중단한 부분부터 바로 시작할 수 있습니다.
이 Serverless AWS Lambda Development 강의에서 코드를 작성하고 실행할 수 있나요?
네. 모든 Serverless AWS Lambda Development 강의에는 내장 코드 에디터가 포함되어 있으므로, 브라우저에서 바로 실제 코드를 작성하고 실행한 후 즉시 AI 피드백을 받을 수 있습니다 — 로컬 설정이 필요 없습니다.
이 강의의 모든 강의
- 프라이빗 리소스를 위한 VPC 내 Lambda
- VPC에서 데이터베이스에 액세스하기
- 네트워크 보안 모범 사례
- NAT 게이트웨이와 VPC에서의 인터넷 접근